JASON 4430V790 VARIABLE SPEED BELT, V-BELT SECTION "V" OUTSIDE LENGTH 79" TOP WIDTH 2.75 "
CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4430V790 >
Recently Viewed
JASON 4430V790 VARIABLE SPEED BELT, V-BELT SECTION "V" OUTSIDE LENGTH 79" TOP WIDTH 2.75 "
CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4430V790 >
JASON 3V670 3V SECTION DEEP WEDGE V-BELTS. 3/8-" TOP WIDTH, 5/16-" THICK, 67 " OUTSIDE LENGTH.
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
NOTCHED GRIP V-BELT >67."-JAS3VX670 >
2-1/2" FLEXIBLE METAL CONDUIT CONNECTOR - APLSC250 >
SMALL BINOCULAR WITH CARRY PACK - JWH803685 >
3" X 1/4" HEX SHANK COARSE CRIMPED WIRE WHEEL - It's designed for easy access into narrow holes and confined areas. This wire wheel brush features crimped style wire which is ideal for light to medium-duty applications. It removes rust, scale, paint, and weld spatter in hard to reach areas. Designed to be used with common 1/4 in diameter electric power drills or pneumatic (air) drills.
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
