2R-RV-2120 JASON INDUSTRIAL PRODUCTS
BANDED V-BELTS-JAS2R5V2120>
Recently Viewed
BANDED V-BELTS-JAS2R5V2120>
STIEBEL ELTRON 220816 Mini™ Single Handwashing Sink Electric Tankless Water Heater, 120 V AC, 3000 W, 1 ph, 3/8 in Water, 25 A, Commercial/Residential/Dual: Commercial
The tankless electric water heater shall be equipped with a bare wire nickel chrome type heating element housed in fiberglass reinforced high temperature plastic containment. The housing of the unit shall be made of high impact polycarbonate plastic. The flow switch that operates the heating element shall be of the mechanical pressure differential type. The unit shall be equipped with a safety high-limit switch with manual reset. The water connections shall be designed for standard 3/8 in O.D. flexible braided stainless steel hose type connectors. The unit shall be mounted with water connections facing either top or bottom only. The units shall ship with a AWG #12 wire harness with a length of 2 ft. The unit shall conform to ANSI /UL. 499 and be certified to CAN/CSA E335-1 and E335-2-35.
2-1/2" -FEMALE PIPE THREAD METAL BLACK TEE-JPW21/2BT >
Campbell® 6423108 GX Series Structural Short Leg Plate Clamp, 2 ton Load, 1/16 to 7/8 in Jaw Opening, 5-1/8 in OAW, Forged Steel, Load Activated Locking
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Browning® 767876 VPLS 100 Intermediate Duty Low Base Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 5-13/64 to 6-7/64 in L Bolt Center-to-Center, 2-1/16 in Base to Bore Centerline, 7-3/8 in OAL x 4-3/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
1/2" NOZZLE-PDTLV5551803>
