425-5-M-10 JASON INDUSTRIAL PRODUCTS
5-MM-PITCHX425-MM TIMING BELT-JAS4255M10 >
Recently Viewed
5-MM-PITCHX425-MM TIMING BELT-JAS4255M10 >
Drillco 76A120C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 5/16 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
STAINLESS STEEL BELT FASTENERS-COV125S30 >
The United Abrasives/SAIT Type 27 Saitech Ultimate Performance™ wheels are made to go on an angle grinder. High performance, ceramic aluminum oxide grain, is designed to outlast standard aluminum oxide wheels. Hard bond for long life grinding with fast stock removal. Very uniform, high density grain structure for long life and cooler cut. United Abrasives/SAIT wheels are reinforced with the highest quality fiberglass for maximum safety and performance. Proudly manufactured in the USA.
KEN FORGING K2030 Fully Threaded Shoulder Pattern Eye Bolt, 1-8, 2-1/2 in L Shank, Drop Forged Carbon Steel, Self-Colored
Browning® 1296441 T45L Automatic Torque Limiter, 1-1/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
