1120-XH-300 Xh-pitch X 112" Timing
XH-PITCH X 112" TIMING BELTS-DAY1120XH300>
Recently Viewed
XH-PITCH X 112" TIMING BELTS-DAY1120XH300>
BEARINGS-TAPERED ROLLER BEARING CUPS-CHIBR563>
Gates® Power Transmission Poly Chain® GT®2 8MX-35S-21 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.446 in OD, 35 Grooves, 3.509 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Dodge® 131848 212 Normal Duty Pillow Block Ball Bearing Unit, 2-1/4 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2.69 in Base to Bore Centerline, 9-1/2 in OAL x 5.34 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
Thomson LINEAR BEARINGS 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L THP OPN-122026
Precision Steel Ball Bushing® bearings offer great improvements in efficiency, productivity and accuracy over high-friction plain bearings flat-ways. The all-steel design makes the bearing product line perfect for replacing plain bearings in high temperature applications. Rigid construction makes them very durable compared to ball bushing bearings with polymer components. When installed in a standard Thomson® pillow block, the Precision Steel Ball Bushing® bearing can self-align up to 3 deg in all directions.
Chapin® 1949 Concrete Open Head Sprayer, 3.5 gal, 0.5 to 1 gpm, 40 to 60 psi, 48 in Hose Length, Tri-poxy® Steel Tank
The Chapin® industrial FKM concrete sprayer has a 3.5 gal Tri-Poxy® lined steel tank that provides triple protection against rust, corrosion and damage from denting. Featuring a large 4 in mouth opening for easy filling and cleaning, brass wand, brass shut-off, brass fan tip nozzle for even coverage, a 48 in reinforced hose with threaded fittings and FKM seals for most concrete sealer applications (check chemical manufacturers instructions before use). Our open head tanks have a unique tri-lock seal that insures the pump cap locks tightly into place.
