4-L-300 1/2" x 30" FHP Browning V-Belt
Wrapped construction - Browning offers a full line of wrapped FHP Belts which provides smooth quiet operation. Wrapped FHP Belts are more tolerant to slipping and misalignment than Raw Edge Belts.
The best features of notched and wrapped belts. Designed for small sheave applications - Browning FHP Belts are formulated for maximum flexibility for use in small diameter sheaves.
Recently Viewed
Wrapped construction - Browning offers a full line of wrapped FHP Belts which provides smooth quiet operation. Wrapped FHP Belts are more tolerant to slipping and misalignment than Raw Edge Belts.
The best features of notched and wrapped belts. Designed for small sheave applications - Browning FHP Belts are formulated for maximum flexibility for use in small diameter sheaves.
GP® 3038R Standard Length Socket, 3/4 in, 1-3/16 in Hex Socket, 6 Points
DOUBLE SHIELDED BALL BEARINGS-GEN2220977>
GEARWRENCH® 120XP™ 85196 Flex Head Electronic Torque Wrench With Angle, 1/2 in Drive, 25 to 250 ft-lb, Ratcheting Head, 0.1 ft-lb/0.1 N-m Graduation, 23.7 in OAL, ASME B107.10/B107.12/B107.28/B107.300
The GEARWRENCH family of torque wrenches & torque products offer the latest innovations in torque measurement. Included in the line are micrometer, tire shop, beam and electronic torque wrenches, as well as, torque multipliers. The micrometer wrenches are available in fixed head and flex head. The fixed head line offers wrenches in 1/4" to 3/4" drives. The flex head wrenches are available in 3/8" and 1/2" drives. The tire shop wrenches feature a rugged tire tread rubber cover on the head intended to specifically be used for checking wheel lug nuts and are available in 3/8" and 1/2" drives. The electronic torque wrenches ensure a more precise fastener torque level and are available in a 3/8" and 1/2" drives. The GEARWRENCH line of torque products allow the user to complete any job where accurate torque is required.
2"-MPT X 3/4"-FPT ELEC/BUSHINGS-ELELRB13>
The MRC R14FF is a single-row, inch-sized Conrad radial deep groove ball bearing manufactured by MRC (a brand of SKF). It features double metal shields (designated by the "FF") to keep lubricant in and contaminants out. Physical Specifications Bore Diameter (ID): 0.8750 inches (7/8 in) Outside Diameter (OD): 1.8750 inches (1-7/8 in) Overall Width (B): 0.5000 inches (1/2 in) Weight: 0.23 lbs.
