SPHERICAL PLAIN BEARINGS
SNW-06 X 15/16 WESCO 15/16" SPHERICAL BEARING ADAPTERS
The code SNW06X15/16 does not directly match a standard product or part number in public manufacturer databases for Wesco, which typically uses part numbers like numeric sequences (e.g., 260015) or prefix codes for traction and snow equipment. It may refer to an adapter sleeve size format (similar to an SNW series adapter with a specific shaft/bore dimension) or a specialized hardware/type chain sizing code.
SNW-11 X 1-15/16 WESCO 1-15/16" SPHERICAL BEARING ADAPTER-WESSCO SNW11X115/16>
Shaft/Bore Diameter: 1-15/16 inches (1.9375 in / 49.21 mm) Overall Length: 46.86 mm (1.8350 in) Thread Size: 2.157-18Outer Taper Ratio: 1:12 (standard for spherical and self-aligning ball bearings) Material: High-strength carbon steel
SNW-111X1-15/16 WESCO 1-15/16" SPHERICAL BEARING ADAPTER
1-15/16" SPHERICAL BEARING ADAPTER
SNW-120X3-7/16 WESCO 3-7/16" SPHERICAL BEARING ADAPTERS
Bore / Shaft Diameter: 3.4375 inches (3-7/16") Overall Length: 100.86 mm (approx. 3.97 inches) Thread Size: 3.918-12Included Components: S-120 sleeve, AN-20 locknut, and W-20 lockwasher Compatible Bearings: 22300K and 23200K series roller bearings
SNW-13 X 2-1/4 WESCO 2-1/4" SPHERICAL BEARING ADAPTERS
The term Wesco nw13x21/4 does not match a standard product name or part number from Wesco Industrial Products or Wesco International. It may combine an NW13 metric/nominal size component (such as a braided hose or cable protection conduit) with dimensions like 21/4 inches.
SNW-17 X 2-15/16 WESCO 2-15/16" SPHERICAL BEARING ADAPTER
SNW 17X2.15/16
Adapter sleeve with AN or N lock nut and W lock washer, inch dimensions
Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. The sleeves are slit and are supplied complete with an lock nut and locking device. They are easy to install and require no additional location on the shaft.
Easy to install
Complete with lock nut
Complete with locking device
SNW-22 X 4 WESCO 4" SPHERICAL BEARING ADAPTERS
Bore / Shaft Diameter: 4.0000 inches (101.60 mm) Thread Size: 4.325-12Overall Width / Length: 3.1960 inches (81.43 mm) Taper Ratio: 1:12Material: High-grade Steel Included Components: Comes complete with a slit sleeve, an AN22 lock nut, and a W22 lock washer.
SNW-24 X 4-3/16 WESCO 4-3/16" SPHERICAL BEARING ADAPTERS
Adapter Sleeves / Bearings: Designations starting with SNW correspond to standard tapered adapter sleeves used to mount bearings on shafts (common industrial parts from brands like Link-Belt/Wesco or SKF/Timken).Dimensions: The numbers often denote shaft sizes or specific outer/inner diameters (such as a 4-3/16" adapter).
SNW-28 X 4-15/16 WESCO 4-15/16" SPHERICAL BEARING ADAPTER
Adapter Sleeve - 4.9375 in Bore Dia., 101.12 mm Overall Length, 5.497-12 Thread Size, Steel Material
3/4" -ID SPHERICAL OD INSERT BEARING-IDCUC20412G >
20-MM-ID SPHERICAL OD INSERT BEARING-IDCUC20420MMG >
1-1/4" -ID SPHERICAL OD INSERT BEARING-IDCUC20620G >
1-1/4" -ID SPHERICAL OD INSERT BEARING-IDCUC20720G >
1-3/8" -ID SPHERICAL OD INSERT BEARING-IDCUC20722G >
50-MM-ID SPHERICAL-OD INSERT BEARING - FYHUC310>
40-MM-ID SPHERICAL OD INSERT BEARING-AMIUC20840 >
1-1/2" -ID SPHERICAL OD INSERT BEARING-AMIUCX0824 >
1-1/4"-ID SPH/OD INSERT BEARINGS-MBUVE120>
VE110 5/8"-ID Sph/OD Insert Bearing
5/8"-ID SPH/OD INSERT BEARINGS-MBUVE110>
1-5/8"-ID SPH/OD INSERT BEARINGS-MBUVS226>
2-11/16"-ID SPH/OD INSERT BEARINGS-MBUVS243>
2-11/16"-ID SPH/OD INSERT BEARINGS
1-1/4 SPH/OD INSERT BEARINGS-BRWVS320>
2" ID SPH/OD INSERT BEARING-BRWVS332>
Recently Viewed
Sealmaster 2-7/16"-ID 2-BOLT SPH PILLOW BLOCK BRW SPB-1000-NE X 2-7/16
Sealmaster® USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized bearing geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in a wide variety of bore sizes, housing styles and sealing options.
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
3/8" -HOSEX8-FEMALE JIC 45 HYDRAULIC HOSE END-MHDE0608FJ45 >
Dodge® Tigear-2® 23Q40L14 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 1.11 hp, 40:1 Gear, 44 rpm Maximum Output, 1193 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
3/4" -10X36" USS LEFT HANDED THREADED ROD-NBS9790750300 >
