VE-120 1-1/4"-ID Sph/OD Insert Bearing
1-1/4"-ID SPH/OD INSERT BEARINGS-MBUVE120>
Recently Viewed
1-1/4"-ID SPH/OD INSERT BEARINGS-MBUVE120>
MORSE® 38146 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M3x0.5 Thread, D3 Thread Limit, Tapered Chamfer, 3 Flutes, Bright, HSS
Techtop GR3-CI-TF-182T-4-B-D-3 AC Motor With Class H Stator, TEFC Enclosure, 3 hp, 230/480 V AC, 60 Hz, 182T Frame, 1800 rpm Speed, Rigid Mount
Techtop GR3-CI-TF-182T-4-B-D-3 AC Motor With Class H Stator, Totally Enclosed Fan Cooled Enclosure, 3 hp, 230/480 VAC, 60 Hz, 182T Frame, 1800 rpm Speed, Rigid Mount
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Dichtomatik 67004048 O-Ring, 13 mm ID x 17 mm OD, Nitrile Rubber, 70 Shore A Durometer, Domestic, Custom H-2 x 13
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
