SPHERICAL PLAIN BEARINGS
SNW-06 X 15/16 WESCO 15/16" SPHERICAL BEARING ADAPTERS
The code SNW06X15/16 does not directly match a standard product or part number in public manufacturer databases for Wesco, which typically uses part numbers like numeric sequences (e.g., 260015) or prefix codes for traction and snow equipment. It may refer to an adapter sleeve size format (similar to an SNW series adapter with a specific shaft/bore dimension) or a specialized hardware/type chain sizing code.
SNW-11 X 1-15/16 WESCO 1-15/16" SPHERICAL BEARING ADAPTER-WESSCO SNW11X115/16>
Shaft/Bore Diameter: 1-15/16 inches (1.9375 in / 49.21 mm) Overall Length: 46.86 mm (1.8350 in) Thread Size: 2.157-18Outer Taper Ratio: 1:12 (standard for spherical and self-aligning ball bearings) Material: High-strength carbon steel
SNW-111X1-15/16 WESCO 1-15/16" SPHERICAL BEARING ADAPTER
1-15/16" SPHERICAL BEARING ADAPTER
SNW-120X3-7/16 WESCO 3-7/16" SPHERICAL BEARING ADAPTERS
Bore / Shaft Diameter: 3.4375 inches (3-7/16") Overall Length: 100.86 mm (approx. 3.97 inches) Thread Size: 3.918-12Included Components: S-120 sleeve, AN-20 locknut, and W-20 lockwasher Compatible Bearings: 22300K and 23200K series roller bearings
SNW-13 X 2-1/4 WESCO 2-1/4" SPHERICAL BEARING ADAPTERS
The term Wesco nw13x21/4 does not match a standard product name or part number from Wesco Industrial Products or Wesco International. It may combine an NW13 metric/nominal size component (such as a braided hose or cable protection conduit) with dimensions like 21/4 inches.
SNW-17 X 2-15/16 WESCO 2-15/16" SPHERICAL BEARING ADAPTER
SNW 17X2.15/16
Adapter sleeve with AN or N lock nut and W lock washer, inch dimensions
Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. The sleeves are slit and are supplied complete with an lock nut and locking device. They are easy to install and require no additional location on the shaft.
Easy to install
Complete with lock nut
Complete with locking device
SNW-22 X 4 WESCO 4" SPHERICAL BEARING ADAPTERS
Bore / Shaft Diameter: 4.0000 inches (101.60 mm) Thread Size: 4.325-12Overall Width / Length: 3.1960 inches (81.43 mm) Taper Ratio: 1:12Material: High-grade Steel Included Components: Comes complete with a slit sleeve, an AN22 lock nut, and a W22 lock washer.
SNW-24 X 4-3/16 WESCO 4-3/16" SPHERICAL BEARING ADAPTERS
Adapter Sleeves / Bearings: Designations starting with SNW correspond to standard tapered adapter sleeves used to mount bearings on shafts (common industrial parts from brands like Link-Belt/Wesco or SKF/Timken).Dimensions: The numbers often denote shaft sizes or specific outer/inner diameters (such as a 4-3/16" adapter).
SNW-28 X 4-15/16 WESCO 4-15/16" SPHERICAL BEARING ADAPTER
Adapter Sleeve - 4.9375 in Bore Dia., 101.12 mm Overall Length, 5.497-12 Thread Size, Steel Material
UC-204-12-G 3/4" -ID Spherical OD Insert
3/4" -ID SPHERICAL OD INSERT BEARING-IDCUC20412G >
UC-204-20-MMG 20-mm-ID Spherical OD Insert
20-MM-ID SPHERICAL OD INSERT BEARING-IDCUC20420MMG >
UC-206-20-G 1-1/4" -ID Spherical OD Insert
1-1/4" -ID SPHERICAL OD INSERT BEARING-IDCUC20620G >
UC-207-20-G 1-1/4" -ID Spherical OD Insert
1-1/4" -ID SPHERICAL OD INSERT BEARING-IDCUC20720G >
UC-207-22-G 1-3/8" -ID Spherical OD Insert
1-3/8" -ID SPHERICAL OD INSERT BEARING-IDCUC20722G >
UC-310 50-mm-ID Spherical-OD Insert Bearing
50-MM-ID SPHERICAL-OD INSERT BEARING - FYHUC310>
UC208-40 40-mm-ID Spherical OD Insert
40-MM-ID SPHERICAL OD INSERT BEARING-AMIUC20840 >
UCX0824 1-1/2" -ID Spherical OD Insert
1-1/2" -ID SPHERICAL OD INSERT BEARING-AMIUCX0824 >
VE-120 1-1/4"-ID Sph/OD Insert Bearing
1-1/4"-ID SPH/OD INSERT BEARINGS-MBUVE120>
VE110 5/8"-ID Sph/OD Insert Bearing
5/8"-ID SPH/OD INSERT BEARINGS-MBUVE110>
VS-226 1-5/8"-ID Sph/OD Insert Bearing
1-5/8"-ID SPH/OD INSERT BEARINGS-MBUVS226>
VS-243 2-11/16"-ID Sph/OD Insert Bearing
2-11/16"-ID SPH/OD INSERT BEARINGS-MBUVS243>
VS-248 2-11/16"-ID Sph/OD Insert Bearing
2-11/16"-ID SPH/OD INSERT BEARINGS
Recently Viewed
Browning 25-TOOTH #80 CHAIN DOUBLE SPROCKET BRW D-80-TB-25
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
20-TOOTH SPROCKETS FOR #35 CHAIN IDC 35-B-20-F-3/4
20 TOOTH SPROCKETS FOR #35 CHAIN
563" X 1.375" X .250" RADIAL SHAFT NITRILE OIL SEAL.
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Proto® J49905/32 Extra Long Socket Driver Bit, Imperial, 3/8 in, 5/32 in, 1-5/8 in L Bit, Federal GGG-W-641Ex
GP® 4038MD Deep Length Socket, 1 in, 38 mm Hex Socket, 6 Points
