CSA-207-23 1-7/16" -ID Flat/cylindrical Outside Diameter Insert
1-7/16" -ID FLAT/CYLINDRICAL OUTSIDE DIAMETER INSERT BEARING-IDCCSA20723 >
Recently Viewed
1-7/16" -ID FLAT/CYLINDRICAL OUTSIDE DIAMETER INSERT BEARING-IDCCSA20723 >
Browning® 1079094 Split Taper Bushing, 2-3/8 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Milwaukee® 49-57-0750 Annular Cutter, 3/4 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
BBI 693100 Teks® Fully Threaded Self-Drilling Screw, #8-18, 2 in OAL, Indented Hex/Washer Head, Unslotted Drive, Low Carbon Steel, Zinc CR+3, Drill Point
BBI 693100 Teks® Fully Threaded Self-Drilling Screw, #8-18, 2 in OAL, Indented Hex/Washer Head, Unslotted Drive, Low Carbon Steel, Zinc CR+3, Drill Point
Precision Ratcheting End: Features a 72-tooth precision-machined internal gear that provides a tight 5-degree swing arc. Knuckle Clearance: Designed with a 12-degree offset on the ratcheting box end to safely clear obstacles and flat surfaces. Radius Corner Design: Engages the flat sides of fasteners rather than the sharp corners. This increases torque by up to 15% to 20% and prevents bolt rounding. Debris Protection: Built with an enclosed ratcheting mechanism to keep dirt, grease, and debris out, extending the life of the tool.
Browning 30-TOOTH #40-1 CHAIN SPROCKETS BRW H-4030 X 1.3/16
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
