BALL BEARINGS
R-6-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING-GULR62RSNR >
R-4-ZZ Double Sealed Ball Bearing
The MRC R4ZZ is an inch-series, single-row radial deep groove ball bearing manufactured by MRC (a brand under SKF). It is a small Conrad-type bearing designed for high-speed industrial automation and motion control applications that handle radial and moderate thrust loads. Key Specifications Bore Diameter (Inner): 0.2500 inches (1/4 in) Outside Diameter: 0.6250 inches (5/8 in) Width: 0.196 inches (approx. 5 mm) Enclosure Type: Double shielded/sealed ("ZZ" indicates two protective closures to keep grease in and dirt out) Load Capacities: Supports a 332 lbf dynamic load and a 139 lbf static load Precision Rating: ABEC-1 standard industrial precision
R-4-A-ZZ Double Shielded Mini Ball Bearing
DOUBLE SHIELDED MINI BALL BEARING-GULR4AZZ >
R-4-A-2-RS DOUBLE-SEALED MINI BALL BEARINGS
DOUBLE SEALED MINI BALL BEARING-GULR4A2RS >
R-3-2-Z Double Shielded Mini Ball Bearing
DOUBLE SHIELDED MINI BALL BEARING-GULR32Z >
Recently Viewed
Browning® 1112085 Double Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 to 2-1/8 in Dia Bore, 4.12 in OD, 50 Chain, 19 Teeth, 5/8 in Pitch, Steel
Browning® offers type A plate steel sprockets in single strands. Offerings include 25 to 200 pitch range.
4-GRV C-BELT QUICK DISCONNECT E-BUSH SHEAVES-IDC4C130E >
NIBCO® NL2H00C T-174-A Block Pattern Gate Valve, 1-1/2 in Nominal, Threaded End Style, 300 lb, Bronze Body, Handwheel Actuator, Domestic
The NIBCO® bronze gate valve may be used in commercial and industrial applications, HVAC, specifically for medium to high pressure steam, and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
1-1/4" X .031" STRAPPING--ROLL OF 100-LB - DUB11/4X031 >
Dichtomatik N70449 O-Ring, 449 Dash Number, 9.975 in ID x 10.525 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DELUXE MIN MAX POCKET THERMOMETER-GNLDPT392FC >
