NIBCO® NL2H00C T-174-A Block Pattern Gate Valve, 1-1/2 in Nominal, Threaded End Style, 300 lb, Bronze Body, Handwheel Actuator, Domestic
The NIBCO® bronze gate valve may be used in commercial and industrial applications, HVAC, specifically for medium to high pressure steam, and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
-
BrandNIBCO®
-
UPC039923620248
-
Manufacturer Part NumberNL2H00C
-
CountryUSA
-
Pressure Class300 lb
-
Pressure Rating600 psi
-
Top to Inlet Center10-1/4 in
-
MediaWater
-
Trim MaterialSilicon Bronze
-
TypeBlock Pattern
-
Actuator TypeHandwheel
-
Nominal Size1-1/2 in
-
SeriesT-174-A
-
Inlet to Outlet Length3.38 in
-
Softgoods MaterialAramid Fiber
-
Domestic/ImportDomestic
-
Body MaterialBronze
-
End StyleThreaded
- 300 psi/20.7 bar saturated steam to 421F/216C
- 600 psi/41.4 bar non-shock cold working pressure
- Rising stem
- Alloy solid wedge
- Class 300 threaded end connections
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- Dezincification resistant
- Female threaded ends allow for ease of installation
- The copper nickel alloy solid wedge, integral seats and bi-directional service make the gate valve a good choice for higher pressures, temperature and corrosive services
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | NT174AJ |
-
UNSPSC40141613
-
Package DescriptionEACH
-
Standards/ApprovalsMSS SP-80|PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Warranty5 years Limited
-
SDS
-
Warranty Information
-
Specification Sheet
-
Instruction/Installation Manual
-
Owners/User Manual
Recently Viewed
NIBCO® NL2H00C T-174-A Block Pattern Gate Valve, 1-1/2 in Nominal, Threaded End Style, 300 lb, Bronze Body, Handwheel Actuator, Domestic
The NIBCO® bronze gate valve may be used in commercial and industrial applications, HVAC, specifically for medium to high pressure steam, and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
#10 X 7/8" Flat Head Phillips Wood Screw
4' X 10' X 1/8" CONDUCTIVE UHMW SHEETS-CPI4X10X1/8UHMWCON >
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
High quality steel material. Zinc plated finish. Size is clearly marked on each piece. Precision Brand® keystock is used to provide driving torque between shafts and pulleys, gears, sprockets, etc. Used for new machinery, general maintenance and shop repairs. It is a necessity in all applications where rotating power devices are used. Most tolerances on dimensions are oversized to assure tight fits in keyways for positive, zero backlash power transmission.
TOOL BRUSH SET-MTB316034930 >
