Porter-Cable 51/64" ROUTER TEMPLATE GUIDES POR 42042
Porter-Cable® 42042 template guides are a great way to guide a router for a very controlled cut using a pattern or template. The guide attaches to the router base to keep the bit a specific distance from the template's edge while allowing the bit to cut in where needed.
-
BrandPorter-Cable®
-
UPC039404102560
-
Manufacturer Part Number42042
-
CountryUSA
-
MaterialSteel
-
Specifications5/8 in ID, 9/16 in Distance Past Base
-
Outer Diameter51/64 in
-
Suitable For Use WithStandard Router
-
UNSPSC27112800
-
Package Description1/PK
Recently Viewed
Porter-Cable® 42042 template guides are a great way to guide a router for a very controlled cut using a pattern or template. The guide attaches to the router base to keep the bit a specific distance from the template's edge while allowing the bit to cut in where needed.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1890-14MGT-40 9232 Synchronous Belt, 135 Teeth, 14 mm Pitch, 1890 mm OAL, 40 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
3/8" X 1/2" MALE QUICK CONNECT PLUG-FTGP400X6X8M >
Milwaukee® 49-57-2000 Annular Cutter, 2 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
2-1/2" SWIVEL PLATE CASTERS. FOR MOBILITY OF HEAVY LOADS ON FINISHED FLOORING. WEIGHT UP TO 100 LBS-JWH216901 >
33-GALLON 33X39 TRASHCAN LINERS--BOX OF 250
