Crosby® 1019490 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019490 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1019490
-
CountryUSA
-
Load Capacity3.25 ton
-
FinishHot Dipped Galvanized
-
SeriesG-2130
-
Inner Length2-3/8 in
-
Inner Width1.69 in
-
Size5/8 in
-
Opening Size1.06 in
-
Body MaterialCarbon Steel
-
Overall Length4.19 in
-
Overall Width3.56 in
-
Eye Outer Size1-1/2 in
-
Pin Diameter0.77 in
-
Pin MaterialAlloy
-
Pin TypeBolt
- Working load limit and grade 6 permanently shown on every shackle
- Approved for use at -40 to 400 deg F
- 3.1 Certification as standard available for charpy and statistical proof test from 3.25 ton up to 25 tons to DNV2.7-1 and EN13889
- Crosby® 3.25 ton through 25 ton G2130OC anchor shackles are type approved to DNV certification notes 2.7-1 offshore containers
- The Crosby® shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- All other 2130 shackles can meet charpy requirements of 42 J average at -4 deg F when requested at time of order
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV2.7-1 Certified|EN13889|Federal Spec RR-C271F|Type IVA|Grade A|Class 3
-
Catalog
Recently Viewed
Crosby® 1019490 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019490 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Hot Dipped Galvanized
Milwaukee® M18™ 2801-20 Compact Brushless Cordless Drill, 1/2 in Chuck, 18 VDC, 0 to 500/0 to 1800 rpm No-Load, 6-1/2 in OAL, Li-Ion Battery
The M18™ 1/2 in. compact brushless drill/driver delivers the most power in its class while maintaining compact size. The Milwaukee built brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries provides more efficient power delivery, for fewer trips to the charger. At only 6-1/2 in. long and 3.4 lbs. (with battery), this drill provides excellent control and balance in a compact size, perfect for work overhead or in tight spaces. This compact drill driver 500 in-lbs of torque and 0-500 / 0-1, 800 RPM, for a wide range of drilling and fastening applications. An all-metal gear case and 1/2 in. metal chuck provides maximum durability.
Crosby® 1048648 L-322CN Swivel Hook With Latch, 5 ton Load, Swivel Attachment, Forged Carbon Steel
Crosby® 1048648 L-322CN Swivel Hook With Latch, 5 ton Load, Swivel Attachment, Forged Carbon Steel
84" VERTICAL SCHULTE SHELVING POLE-JWH217905>
RIDGID® 34652 Centering Head Rear Cover, For Use With: Model 1822-I Pipe and Bolt Threading Machine
RIDGID® 34652 Centering Head Rear Cover, For Use With: Model 1822-I Pipe and Bolt Threading Machine
Crosby® 1027169 H-330 Grab Hook, 7/16 in Trade, 7200 lb Load, Clevis Attachment, Forged Carbon Steel
Crosby® 1027169 H-330 Grab Hook, 7/16 in Trade, 7200 lb Load, Clevis Attachment, Forged Carbon Steel
