315966 DO-IT-BEST/HWI PRODUCTS
180-GRIT DRILL DOCTOR DIAMOND WHEEL - JWH315966>
Recently Viewed
180-GRIT DRILL DOCTOR DIAMOND WHEEL - JWH315966>
GSS Ground Pigtail With Green Slotted Hex Head Captive Screw, 12 AWG Solid Wire, 6-1/2 in L, Screw Terminal, Copper
Southwire® Madison Electric 125 Snap-On Rigid Strap, 3/4 in Conduit, Steel
RIDGID® Qwik-Lock™ 26643 VF3500 3-Layer Fine Dust Filter, For Use With: RIDGID® 4 Gallon Portable Pro Vacuum
The RIDGID® 3-Layer fine dust replacement filter features 3 layers of filtering material that captures particles too small to be seen by the naked eye. The pleated design offers a large surface area to trap superfine dust and dirt.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
3/4" X 12" L CONCRETE ANCHOR BOLT-NBS9290751200 >
