HCI Preferred Supplier 949170 2-Piece Ball Valve, 3 in Nominal, ASTM-A351 CF8M 316 Stainless Steel Body, Full Port, RPTFE Seal/Thrust Washer/Plastic Cover Softgoods
HCI Preferred Supplier 949170 2-Piece Ball Valve, 3 in Nominal, ASTM-A351 CF8M 316 Stainless Steel Body, Full Port, RPTFE Seal/Thrust Washer/Plastic Cover Softgoods
-
BrandGeneric
-
Manufacturer Part Number949170
-
CountryUSA
-
Temperature Rating-60 to 450 deg F
-
Port TypeFull
-
Pressure Rating1000 psi WOG, 125 psi WSP
-
MediaCold Water, Oil, Gas and Saturated Steam
-
Trim MaterialAISI 316 Stainless Steel Stem/Reinforced PTFE Seat
-
Type2-Piece
-
Nominal Size3 in
-
Ball MaterialASTM A351 CF8M 316 Stainless Steel
-
Dimensions5.43 in H x 6.81 in W
-
Softgoods MaterialRPTFE Seal/Thrust Washer/Plastic Cover
-
Domestic/ImportImport
-
Body MaterialASTM-A351 CF8M 316 Stainless Steel
- Quality manufactured for harsh environments
- Investment casting body
- Adjustable stem packing
- Blow-out proof stem and safe pressure-reducing hole
- Locking handle with blue generic sleeve
- Corrosion-resistant
- 100% leakage tested at 100 psi air under water
- Generic handles
- 1500 psi hydrostatic test pressure
- ASTM-A351 CF8M 316 stainless steel body cap, AISI 304 stainless steel nut, gland nut, washer and handle
- RPTFE seal, thrust washer and plastic cover
-
UNSPSC40141607
-
Package Description2/CS
-
Catalog
Recently Viewed
HCI Preferred Supplier 949170 2-Piece Ball Valve, 3 in Nominal, ASTM-A351 CF8M 316 Stainless Steel Body, Full Port, RPTFE Seal/Thrust Washer/Plastic Cover Softgoods
HCI Preferred Supplier 949170 2-Piece Ball Valve, 3 in Nominal, ASTM-A351 CF8M 316 Stainless Steel Body, Full Port, RPTFE Seal/Thrust Washer/Plastic Cover Softgoods
12" PAINTED RECEIVER TUBE-REDRB12 >
4-GRV BANDED B-55 V-BELT-JAS4RB55 >
38 TOOTH 8-MM-PITCH TIMING BELT SHEAVES-BRWB388M20SH >
JASON 390H100 SYNCHRONOUS BELT, 1/2 " PITCH; 39" PITCH LENGTH ;1" BELT WIDTH.78 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS390H100 >
