Milwaukee® M18™ 2680-22 Type 27 Cordless Cut-Off Grinder Kit, 4-1/2 in Dia Wheel, 18 V DC, Li-Ion Battery, Debris Baffles, 2 Batteries, Paddle Switch
The M18™ cordless Lithium-Ion 4-1/2 in cut-off/grinder provides speed, durability and ease-of-use to the industrial user. Built with a Milwaukee® 4-pole motor the 2680-22 delivers maximum power when cutting or grinding. The 2680-22 is the only cordless cut-off / grinder in the market to provide the user-preferred paddle switch for comfort and ease of use when operating in various positions. L-shape intake vents protect the cut-off / grinder by keeping harmful debris from entering the tool and damaging internal components.
-
BrandMilwaukee®
-
UPC045242158812
-
Manufacturer Part Number2680-22
-
CountryUSA|Canada
-
ColorBlack/Gray/Red
-
TypeType 27
-
Handle Type3-Position/Side
-
Voltage Rating18 V DC
-
Wheel Diameter4-1/2 in
-
Number of Batteries Included2
-
Bare Tool/KitKit
-
Battery Capacity3 Ah
-
Battery TypeLi-Ion
-
Speed9000 rpm
-
Dust ManagementDebris Baffles
-
Switch TypePaddle
- Milwaukee 4-pole motor- delivers maximum power when cutting or grinding
- Overload protection- prevents damage to the tool and battery in abusive situations
- Debris baffles - L-shape vents keep debris from entering the tool and damaging internal components to help increase tool life
- Tool-free, burst-resistant guard allows for quick, easy guard adjustments
- Paddle switch design- the only cordless cut-off /grinder in the market with a paddle switch design
- Up to 35% faster cutting speed
- Up to 50% more cuts on a single charge
- 3-position side handle- provides optimal control and versatility
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4LER1 |
| Grainger | 4LER1 |
-
Alternative Part Number10811247
-
UNSPSC27112704
-
IDEA Index ID10811247
-
Package Description1/PK
-
Standards/ApprovalsUL Listed
-
Warranty5 years
-
Owners/User Manual
-
Full Engineering Drawing
Recently Viewed
Milwaukee® M18™ 2680-22 Type 27 Cordless Cut-Off Grinder Kit, 4-1/2 in Dia Wheel, 18 V DC, Li-Ion Battery, Debris Baffles, 2 Batteries, Paddle Switch
The M18™ cordless Lithium-Ion 4-1/2 in cut-off/grinder provides speed, durability and ease-of-use to the industrial user. Built with a Milwaukee® 4-pole motor the 2680-22 delivers maximum power when cutting or grinding. The 2680-22 is the only cordless cut-off / grinder in the market to provide the user-preferred paddle switch for comfort and ease of use when operating in various positions. L-shape intake vents protect the cut-off / grinder by keeping harmful debris from entering the tool and damaging internal components.
Klein® 5109 Wide Opening Straight Wall Bucket, 15 in H, 1 Pockets, #6 Canvas
The heavy-duty Klein Tools Wide-Opening Straight-Wall Tool Bucket is designed for durability and utility. Made from heavy-duty No. 6 Canvas with a black molded polypropylene bottom, it can handle up to a 75-pound load. The web handle extends down the sides of the bucket for added strength.
Koyo IR-2020 Inch Series Regular Width Inner Ring, 1-1/4 in ID x 1-1/2 in OD, 1.265 in OAW, For Use With B-268, B-2610, B-2616, J-2610, J-2616, M-26161, M-26101 Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
N14Y-N14N-12B by Coilhose | Twin Bonded Coiled Air Hose | 1/4" x 1/4" Hose ID | 1/4" Male NPT Thread x 1/4" Swivel Male NPT Thread | Yellow/Natural | Nylon | 12ft
Drillco 1308A122 Imperial Extra Length Drill, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 8 in OAL, HSS
For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.

