Dremel® 105 Engraving Bit, 1/8 in Bit Diameter, Steel
Dremel® 105 Engraving Bit, 1/8 in Bit Diameter, Steel
-
BrandDremel®
-
Manufacturer Part Number105
-
CountryUSA
-
MaterialSteel
-
Dimensions1.5 in L
-
Specifications1/8 in Bit Diameter
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes
- Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals
- Recommended for detail work
- Ideal for use on curved surfaces
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 21CJ13 |
Recently Viewed
Dremel® 105 Engraving Bit, 1/8 in Bit Diameter, Steel
Browning 2-3/16"-ID 4-BOLT TRB FLANGE UNITS BRW FBE-920 X 2-3/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Morse® 131384 MHSTK Hole Saw, 2-3/8 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 5/8 to 18 Arbor
ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
Hougen® Rotabroach® 12217 12000 Annular Cutter, 17/32 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
19-PIECE INDUSTRIAL VARIABLE PITCH BIMETAL HOLE SAW KIT - MORAV06I >

