WERNER 7' FIBERGLASS 1-A 300# STEPLADDERS WER 6207
The 6207 Fiberglass 7 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751014921
-
Manufacturer Part Number6207
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Tread3 in W
-
TypeType IA
-
ANSI CodeA14.5
-
Series6200
-
Base Spread47-1/2 in
-
Number of Steps6
-
Ladder Height7 ft
-
Bottom Width25-1/8 in
- Holster top is now ToolLasso ready
- Back-up plates reinforce all top connectors
- Shoulder bolt and nut on top hinge
- 4 rivets attach top to each front rail
- All steps and two rear horizontals are knee braced
- Double riveted, slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Every rivet backed up by metal plate or washer to protect rails
- Optional yellow molded pail shelf kit, model no, 76-2
- Energy diffusing geometry
- 3-1/8 in front wide x 1-7/8 in rear wide rail
- 1-3/16 in front wide x 1-3/16 in rear back wide flange
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2113470 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
Recently Viewed
The 6207 Fiberglass 7 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
20-CU/FT PLASTIC UTILITY TRUCK-RBM4720>
MARXMAN™ 85003 330QI General Purpose Jobber Length Drill Bit, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
CURVED WOOD-HANDLE BRASS WIRE SCRATCH BRUSH - MAG1SB >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Browning® 1070291 Split Taper Bushing, 2-1/2 in Dia Bore, 3-7/8 in Small End/4 in Large End Dia Barrel, 5-3/8 in Dia Flange, 2-7/8 in OAL, Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
