Power Tool Parts & Repair Kits
Milwaukee® 48-37-7007 Concrete Vibrator Shaft, For Use With MX FUEL™ MXF371-2XC Concrete Vibrator
The MILWAUKEE® 7 ft Concrete Vibrator Shaft is designed to transfer power from the motor to the concrete vibrator head. These shafts offer superior durability and productivity. The all-metal coupling prevents melting and deformation throughout the shaft’s life. All Milwaukee shafts feature a quick connect system that allows professionals to quickly and easily attach and detach the shaft. The Concrete Vibrator Shaft is for use with the MX FUEL™ Backpack Concrete Vibrator.
Milwaukee® 48-44-0260 Replacement Shear Punch, For Use With 6890 16 ga Nibbler, NEMA 1-15P
This item is the replacement punch for Milwaukee's 16 gauge nibbler model 6890. The replacement die, 48-44-0270, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the punch.
Milwaukee® 48-44-0265 Replacement Shear Punch, For Use With 6880 10 ga Nibbler, NEMA 1-15P
This item is the replacement punch for Milwaukee's 10 gauge nibbler model 6880.
Milwaukee® 48-44-0270 Shear Die, For Use With 6890 16 ga Nibbler, 16 AWG Capacity, NEMA 1-15P
This item is the replacement die for Milwaukee's 16 gauge nibbler model 6890. The replacement punch, 48-44-0260, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the die.
Milwaukee® 48-44-0272 M12 FUEL Nibbler Punch Tool Kit, For Use With 16-Gauge Nibbler Bare Tool
The MILWAUKEE® M12 FUEL Punch and Die Set is to be used with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. The accessory punch and die is the portion of the tool that performs the cutting functionality and must be routinely replaced. This accessory is good for cutting thin sheet metal and corrugated materials.
Milwaukee® 48-44-0275 Replacement Shear Die, For Use With 6880 10 ga Nibbler, 10 AWG Capacity, NEMA 1-15P
This item is the replacement die for Milwaukee's 10 gauge nibbler model 6880. The replacement punch, 48-44-0265, is purchased separately. Must be used with allen wrench 49-96-0350 to remove the punch or die.
Switch box, 20 amp, 120 Volt. Ammeter and power switch are located on the front of the receptacle for easy operator access. Supplied as standard equipment with diamond drill rig model 4115-22 and 4120 - 22.
Milwaukee® 48-58-0080 Replacement Safety Chain, 3/4 ton Capacity, 10 ft Standard Lift, 33 lb Chain Pull to Lift Rated Load
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee at our website.
Milwaukee® 49-15-0260 Side Handle, For Use With 0233-20 Magnum™ Drill
Milwaukee® 49-15-0260 Side Handle, For Use With 0233-20 Magnum™ Drill
Milwaukee® 49-18-0055 Dymo-Rig Coring Rig Water Hose With Standard Brass Male and Female Hose Fitting
Coring rig Dymo-Rig water hose, 8 in., 5/8 in. x 8 Ft, standard brass male and female hose fittings, includes water hose.
Milwaukee® 49-22-7100 Vacuum Pad Assembly, For Use With 4115, 4125, 4130 and 4136 Diamond Coring Rig with Detachable Vacuum Pad, NEMA 1-15P
Vacuum pad assembly for use with models with detachable vacuum pads, 4115, 4125, 4130, and 4136. Single vacuum pad which provides approximately 1,800 Lb. of holding force. Supplied as standard equipment (with models 4115-22 and 4120-22).
Milwaukee® 49-50-0200 Heavy Duty Vacuum Pump Assembly, For Use With 49-22-7100 Pad, 120 V AC, 1/3 hp
Heavy duty 1/3 H.P. Vacuum pump assembly complete with vacuum gauge, air filter, air hose and cord. Supplied as standard equipment (with models 4115-22 and 4120-22). Recommended only for use with 49-22-7100 single pad.
Milwaukee® 49-62-0150 Replacement Scabbard, For Use With 6215-(746-1001) Chain Saw, 16 in
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee® 49-76-0055 Heavy Duty Impact-Resistant Water Tank, 3-1/2 Gallon Poly Tank, NEMA 1-15P
This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.
Milwaukee® QUIK-LOK™ 48-76-4008 Extension Cord, 120 VAC, 10 A, 18 AWG, NEMA 1-15P
This Milwaukee Quik-Lok® cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Milwaukee® QUIK-LOK™ 48-76-4025 Extension Cord, 120 V AC, 10 A, 18 AWG, NEMA 1-15P
This Milwaukee Quik-Lok® cord is a three wire grounded 25 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Milwaukee® QUIK-LOK™ 48-76-4108 Extension Cord, 120 V AC, 18 AWG, NEMA L5-20P
This Milwaukee QUIK-LOKâ„¢ cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the QUIK-LOKâ„¢ cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. Cord has a L5-20P NEMA type plug.
Milwaukee® QUIK-LOK™ 48-76-5010 2-Wire Extension Cord, 125 V AC, 13 A, 16 AWG, NEMA 1-15P
This Milwaukee Quik-Lok® cord is a two wire double insulated 10 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Milwaukee® SHOCKWAVE™ 48-89-4874 5-Piece Impact Drill Tap Set, For Use With Impact Drivers and Drill Drivers, SAE Measurement System
The MILWAUKEE® SHOCKWAVE™ 5 Piece SAE Impact Drill Tap Set taps and drills at the same time. The bits features 24 threads per inch and are intended for use in up to 1/4" metal and have laser etched sizes for easy size identification. The tap drill bit is design for use in Impact Drivers & Drill Drivers.
Porter-Cable® 43218 Down Spiral Drywall Cutout Bit, 3/16 in Cut, 1/4 in Shank
Porter-Cable® 839279 Router Knob, For Use With 1-3/4 hp D-Handle Router
Porter-Cable® 855195 Bearing, For Use With 726 and 736 Portable Band Saws
Porter-Cable® 855196 Bearing, For Use With 726 and 736 Portable Band Saws
Porter-Cable® 853328 Blade Guard, For Use With 726 and 736 Portable Band Saws
Recently Viewed
GEARWRENCH® 84911N Socket Set, ASME B107.33M, 6 Points, 3/8 in Drive, 12 Pieces, Included Socket Size: 8 to 19 mm
GEARWRENCH offers a wide range of impact products in open stock & sets that are designed to deliver the performance and strength that the professional users require. They are made from chrome molybdenum alloy steel for exceptional strength and durability. Our sockets have a manganese phosphate coating to resist corrosion. The sockets also feature highly visible laser etched markings and a secondary size hard stamping. The sockets feature off-corner loading to reduce fastener rounding. The GEARWRENCH impact product family will allow the professional user to FORGE AHEAD.
DeWALT® DCF964GH1 Wrench, 3/4 in Drive, 1750 ft-lb Torque Rating, 20 V
50-ML #592 THREAD SEALANT WITH TEFLON
Dichtomatik 67013594 O-Ring, 180 mm ID x 190 mm OD, FKM, 80 Shore A Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
Heavy duty, round, vinyl extension cord designed for industrial use. Orange vinyl jacket protects against oil, grease, ozone and gives added flexibility at below freezing temperatures. Vinyl plugs and connectors are molded on and won't break or pull off cord.
1-1/4" -IDX1-3/8" -OD VITON O-RING-CUS026VITON >
