Power Tool Parts & Repair Kits
Milwaukee® 48-37-7007 Concrete Vibrator Shaft, For Use With MX FUEL™ MXF371-2XC Concrete Vibrator
The MILWAUKEE® 7 ft Concrete Vibrator Shaft is designed to transfer power from the motor to the concrete vibrator head. These shafts offer superior durability and productivity. The all-metal coupling prevents melting and deformation throughout the shaft’s life. All Milwaukee shafts feature a quick connect system that allows professionals to quickly and easily attach and detach the shaft. The Concrete Vibrator Shaft is for use with the MX FUEL™ Backpack Concrete Vibrator.
Milwaukee® 48-44-0260 Replacement Shear Punch, For Use With 6890 16 ga Nibbler, NEMA 1-15P
This item is the replacement punch for Milwaukee's 16 gauge nibbler model 6890. The replacement die, 48-44-0270, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the punch.
Milwaukee® 48-44-0265 Replacement Shear Punch, For Use With 6880 10 ga Nibbler, NEMA 1-15P
This item is the replacement punch for Milwaukee's 10 gauge nibbler model 6880.
Milwaukee® 48-44-0270 Shear Die, For Use With 6890 16 ga Nibbler, 16 AWG Capacity, NEMA 1-15P
This item is the replacement die for Milwaukee's 16 gauge nibbler model 6890. The replacement punch, 48-44-0260, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the die.
Milwaukee® 48-44-0272 M12 FUEL Nibbler Punch Tool Kit, For Use With 16-Gauge Nibbler Bare Tool
The MILWAUKEE® M12 FUEL Punch and Die Set is to be used with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. The accessory punch and die is the portion of the tool that performs the cutting functionality and must be routinely replaced. This accessory is good for cutting thin sheet metal and corrugated materials.
Milwaukee® 48-44-0275 Replacement Shear Die, For Use With 6880 10 ga Nibbler, 10 AWG Capacity, NEMA 1-15P
This item is the replacement die for Milwaukee's 10 gauge nibbler model 6880. The replacement punch, 48-44-0265, is purchased separately. Must be used with allen wrench 49-96-0350 to remove the punch or die.
Milwaukee® 48-51-0120 Meter Box Assembly, 120 VAC, 20 A
Switch box, 20 amp, 120 Volt. Ammeter and power switch are located on the front of the receptacle for easy operator access. Supplied as standard equipment with diamond drill rig model 4115-22 and 4120 - 22.
Milwaukee® 48-58-0080 Replacement Safety Chain, 3/4 ton Capacity, 10 ft Standard Lift, 33 lb Chain Pull to Lift Rated Load
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee at our website.
Milwaukee® 49-15-0260 Side Handle, For Use With 0233-20 Magnum™ Drill
Milwaukee® 49-15-0260 Side Handle, For Use With 0233-20 Magnum™ Drill
Milwaukee® 49-18-0055 Dymo-Rig Coring Rig Water Hose With Standard Brass Male and Female Hose Fitting
Coring rig Dymo-Rig water hose, 8 in., 5/8 in. x 8 Ft, standard brass male and female hose fittings, includes water hose.
Milwaukee® 49-22-7100 Vacuum Pad Assembly, For Use With 4115, 4125, 4130 and 4136 Diamond Coring Rig with Detachable Vacuum Pad, NEMA 1-15P
Vacuum pad assembly for use with models with detachable vacuum pads, 4115, 4125, 4130, and 4136. Single vacuum pad which provides approximately 1,800 Lb. of holding force. Supplied as standard equipment (with models 4115-22 and 4120-22).
Milwaukee® 49-50-0200 Heavy Duty Vacuum Pump Assembly, For Use With 49-22-7100 Pad, 120 V AC, 1/3 hp
Heavy duty 1/3 H.P. Vacuum pump assembly complete with vacuum gauge, air filter, air hose and cord. Supplied as standard equipment (with models 4115-22 and 4120-22). Recommended only for use with 49-22-7100 single pad.
Milwaukee® 49-62-0150 Replacement Scabbard, For Use With 6215-(746-1001) Chain Saw, 16 in
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee® 49-76-0055 Heavy Duty Impact-Resistant Water Tank, 3-1/2 Gallon Poly Tank, NEMA 1-15P
This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.
Milwaukee® QUIK-LOK™ 48-76-4008 Extension Cord, 120 VAC, 10 A, 18 AWG, NEMA 1-15P
This Milwaukee Quik-Lok® cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Milwaukee® QUIK-LOK™ 48-76-4025 Extension Cord, 120 V AC, 10 A, 18 AWG, NEMA 1-15P
This Milwaukee Quik-Lok® cord is a three wire grounded 25 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Milwaukee® QUIK-LOK™ 48-76-4108 Extension Cord, 120 V AC, 18 AWG, NEMA L5-20P
This Milwaukee QUIK-LOK™ cord is a three wire grounded 8 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the QUIK-LOK™ cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. Cord has a L5-20P NEMA type plug.
Milwaukee® QUIK-LOK™ 48-76-5010 2-Wire Extension Cord, 125 V AC, 13 A, 16 AWG, NEMA 1-15P
This Milwaukee Quik-Lok® cord is a two wire double insulated 10 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Milwaukee® SHOCKWAVE™ 48-89-4874 5-Piece Impact Drill Tap Set, For Use With Impact Drivers and Drill Drivers, SAE Measurement System
The MILWAUKEE® SHOCKWAVE™ 5 Piece SAE Impact Drill Tap Set taps and drills at the same time. The bits features 24 threads per inch and are intended for use in up to 1/4" metal and have laser etched sizes for easy size identification. The tap drill bit is design for use in Impact Drivers & Drill Drivers.
Porter-Cable 3/16" DRYWALL CUTOUT BITS POR 43218
Porter-Cable® 43218 Down Spiral Drywall Cutout Bit, 3/16 in Cut, 1/4 in Shank
Porter-Cable 3/8"-SAE MALE THREADED TOOL KNOB POR 839279
Porter-Cable® 839279 Router Knob, For Use With 1-3/4 hp D-Handle Router
Porter-Cable Bearings POR 855195
Porter-Cable® 855195 Bearing, For Use With 726 and 736 Portable Band Saws
Porter-Cable Bearings POR 855196
Porter-Cable® 855196 Bearing, For Use With 726 and 736 Portable Band Saws
Porter-Cable Blade Guard POR 853328
Porter-Cable® 853328 Blade Guard, For Use With 726 and 736 Portable Band Saws
Recently Viewed
Touch 'n Tone Spray Paint provides a versatile, multi-purpose paint for home, hobby or craft use. Convenient spray application helps complete projects quickly and easily. Available in a wide variety of colors and finishes to provide endless decorating options!
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
1/2" X 2" SOCKET HEAD CAP SCREWS-HOL73138 >
WypAll* 41043 X80 Cleaning Wiper, 13.4 x 12.5 in, 475 Sheets Capacity, Hydroknit*, Blue
Whether you're cleaning up grease or soaking up spills, it pays to use the best supplies. Trust the WypAll® Brand, the one that sets the standard for excellence in cloths. WypAll® X80 Extended Use Cloths feature innovations like high tech HydroKnit fast absorbing material and are durable for scrubbing. These contaminant free commercial cloths are a favorite replacement for industrial cloth towels, which can harbor dangerous chemicals, such as lead (In a 2003 Gradient study, 100% of the sampled laundered shop towels tested, lead was detected at levels that may exceed health based exposure guidelines.). WypAll® X80 are made of soft pulp fibers, bonded to a polypropylene base sheet for absorbency and durability, making them suitable for removing dirt, oil, grime and solvents in industrial and manufacturing businesses. The reusable cloths are reinforced for strength when wet and dry. These bulk cloths are a great alternative safer and more efficient to replace laundered rental shop towels or and cleaning towels. Use them for heavy duty machine and part wiping, wiping metal shavings, prepping surfaces with solvents and cleaning rough surfaces. After all, every business gets dirty. But for the toughest grease and grime, you can trust WypAll® X80 Cloths.
3/4" COPPER SWEAT COUPLING WITH STOP-ELK1003/4 >
Coilhose® PFE61004T Flexeel® PFE6 Straight Air Hose With Reusable Strain Relief, 3/8 in, 1/4 in MPT Rigid, 100 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
