Milwaukee® 2966-20 M18 FUEL™ High Torque Impact Wrench, 1/2 in Drive Square Drive, 0 to 2700 ipm, 900 ft-lb Fastening/1100 ft-lb Nut-Busting Torque Rating, 7.3 in OAL
The MILWAUKEE® M18 FUEL™ ½” High Torque Impact Wrench w/ Pin Detent delivers up to 900 ft-lbs of fastening torque, greater access in tight spaces, and greater durability. The POWERSTATE™ Brushless Motor delivers up to 900 ft-lbs of Fastening Torque and 1,100 ft-lbs of Nut-Busting Torque, providing users with greater power for the most demanding applications. At 7.3” in length, the compact size gives users greater access in tight spaces. The robust design allows users to tackle the most demanding applications on the jobsite all while prolonging tool performance. The patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. The integrated lanyard loop allows users to easily transfer and store the tool. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Pin Detent anvil design maximizes socket retention.
-
BrandMilwaukee®
-
UPC045242601530
-
Manufacturer Part Number2966-20
-
CountryUSA|Canada
-
Torque Rating900 ft-lb Fastening/1100 ft-lb Nut-Busting
-
TypeHigh Torque
-
SeriesM18 FUEL™
-
Battery TypeREDLITHIUM™
-
Dimensions9.35 in H x 3.13 in W
-
Speed0 to 2000 rpm
-
Blows per Minute0 to 2700 ipm
-
Drive Size1/2 in
-
Drive TypeSquare
-
Overall Length7.3 in
- 7.3 in in length provides most access in tight spaces
- Greater Durability - Durability Meets Performance
- Patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fasteners
- AUTO-SHUTOFF control prevents over tightening and increases productivity by applying no more than 50 ft-lbs of torque
- Pin Detent securely locks sockets in place, especially while working overhead
- REDLITHIUM batteries deliver more work per charge and more work over the life of the battery
- REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Compatible with all M18 batteries and chargers
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Warranty5 Year Limited Warranty
-
UNSPSC27112713
-
Owners/User Manual
Recently Viewed
Milwaukee® 2966-20 M18 FUEL™ High Torque Impact Wrench, 1/2 in Drive Square Drive, 0 to 2700 ipm, 900 ft-lb Fastening/1100 ft-lb Nut-Busting Torque Rating, 7.3 in OAL
The MILWAUKEE® M18 FUEL™ ½” High Torque Impact Wrench w/ Pin Detent delivers up to 900 ft-lbs of fastening torque, greater access in tight spaces, and greater durability. The POWERSTATE™ Brushless Motor delivers up to 900 ft-lbs of Fastening Torque and 1,100 ft-lbs of Nut-Busting Torque, providing users with greater power for the most demanding applications. At 7.3” in length, the compact size gives users greater access in tight spaces. The robust design allows users to tackle the most demanding applications on the jobsite all while prolonging tool performance. The patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. The integrated lanyard loop allows users to easily transfer and store the tool. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Pin Detent anvil design maximizes socket retention.
The MILWAUKEE® M18 FUEL™ Braking Die Grinder, Slide Switch, allows users to step up from their corded solutions by delivering 11A Corded Power, and the ability to remove up to 12" of weld bead on (1) M18™ 5.0ah XC Battery. Equipped with RAPIDSTOP™ technology that Provides Braking in under 2 seconds, the M18 FUEL™ Braking Die Grinder, Slide Switch, Provides Enhanced Safety while maximizing work done. The POWERSTATE™ brushless motor delivers 27,000 RPM and maximum power to allow users to maintain grinding power while in the tightest of spaces. This cordless braking die grinder tool delivers up to 2" Accessory Compatibility for material removal and surface prep applications. Milwaukee Die Grinder features REDLINK PLUS™ Intelligence, the most advanced system of Cordless Power tool electronics for maximum performance and longest tool life.
Milwaukee® 2763-22 M18™ FUEL™ High Torque Cordless Impact Wrench Kit With Friction Ring, 1/2 in Square Drive, 2300 bpm, 700 ft-lb Torque, 18 VDC, 9 in OAL
The M18™ FUEL™ 1/2 in high torque impact wrench with friction ring kit features the most powerful cordless wrench in its class, delivering upto 700 ft-lb of maximum fastening torque, 1100 ft-lb of nut-busting torque and upto 2x more runtime the PowerState™ brushless motor outperforms competitors with constant power output and the Milwaukee® designed impact mechanism delivers upto 700 ft-lb of maximum fastening torque. The REDLITHIUM™ XC5.0 extended capacity battery pack (not included) delivers more work per charge and more work Over pack life than Any other battery. It features an onboard fuel gauge to help you monitor the charge more accurately, so there's less downtime on the job. Redlink PLUS™ intelligence allows the operator to choose between 2 fastening modes with Milwaukee® proprietary drive Control™ feature and ensures maximum performance and protection from overload, overheating and over-discharge. This 18 V Li-ion FUEL™ high torque impact wrench offers quick, tool-free socket changes with a 1/2 in friction ring anvil. You'll get ultimate comfort during extended use with the new contoured soft-grip.
No more brush replacements with this 5 in, 6 in brushless paddle switch small angle grinder with kickback Brake, no Lock. Our long lasting brushless motor keeps going with minimized maintenance. It features a brake that stops the wheel quickly. Perform and PROTECT™ features help add user protection with kickback brake and E-CLUTCH®, designed to help provide enhanced control in bind-ups and stalls.
Gardner Bender 46-315UVB Bent Tip UV-Resistant Cable Tie, 14 in L x 0.17 in W x 0.055 in THK, Nylon, UV Black
Gardner Bender's patented double lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes, wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy slip as you tighten while finger grips on the end ensure a secure and comfortable grip when hand-tightening. Investigated using particular requirements that allowed it to be a UL recognized component and with a serviceable temperature range from 0 deg C to 85 deg C (32 deg F to 185 deg F) these ties are designed to last. If you want a high quality product that will fulfill all your application needs, then choose Gardner Bender double lock cable ties.
Milwaukee® 2855-20 M18™ FUEL™ Cordless Variable Compact Impact Wrench With Friction Ring, 1/2 in, 250 in-lb Torque, 18 V, 4.9 in OAL
The MILWAUKEE® M18 FUEL™ 1/2" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.9" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 1/2" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge.
