Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 V AC, 13-3/4 in OAL
Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 VAC, 13-3/4 in OAL
-
BrandMakita®
-
UPC088381001328
-
Manufacturer Part NumberHP2010N
-
CountryCanada
-
Tool/KitBare Tool
-
Chuck Size1/2 in
-
Chuck TypeKeyless
-
ReversibleYes
-
Handle TypeSide
-
Voltage Rating120 V AC
-
Control TypeVariable Speed
-
Amperage Rating6 A
-
Housing MaterialAluminum
-
Number of Speeds2
-
Sound Level97 dBA
-
Speed0 to 900 rpm, 0 to 2300 rpm
-
Blows per Minute0 to 18000/0 to 46000 bpm
-
Overall Length13-3/4 in
- Industrial aluminum gear housing for durability
- 1/2 in keyless chuck will accept 5/8 in concrete bits with 1/2 in reduced shank
- Depth setting rod for easier drilling of accurate hole depths
- 360 deg swivel side handle
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 14F125 |
| Grainger | 14F125 |
-
UNSPSC27112703
-
Includes192877-8 1/2 in Drill Chuck, 763432-9 Chuck Key, 122428-3 Side Handle, 321059-7 Depth Gauge and 824608-4 Plastic Carrying Case
-
Package DescriptionEACH
-
Warranty1 year Limited
-
Instruction/Installation Manual
-
Line Drawing
Recently Viewed
Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 V AC, 13-3/4 in OAL
Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 VAC, 13-3/4 in OAL
1/2" X 2-1/2" HEAVY DUTY RECT DIE SPRINGS-LANSHDR500250 >
F2B-SC-104 Dodge® 124276 207 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.13 in OAL/Dia
F2B-SC-104 Dodge® 124276 207 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.13 in OAL/Dia
F2B-SXR-106 Dodge® 131065 207 Series Normal Duty Non-Expansion Ball Bearing Unit, 1-3/8 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.13 in OAL/Dia
F2B-SXR-106 Dodge® 131065 207 Series Normal Duty Non-Expansion Ball Bearing Unit, 1-3/8 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.13 in OAL/Dia
Precision Brand® 14250 Oversized Key Stock, 1 ft L x 1/4 in W x 1/4 in H, C1018 Steel, Zinc Plated
High quality steel material. Zinc plated finish. Size is clearly marked on each piece. Precision Brand® keystock is used to provide driving torque between shafts and pulleys, gears, sprockets, etc. Used for new machinery, general maintenance and shop repairs. It is a necessity in all applications where rotating power devices are used. Most tolerances on dimensions are oversized to assure tight fits in keyways for positive, zero backlash power transmission.
Precision Brand® 16AA20 Shim Stock, 1008-1010 Full Hard Steel, 120 in Roll L x 12 in W x 0.002 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
