Makita® GA4534 Angle Grinder, 4-1/2 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 120 V AC, 2-Stage Safety Paddle Switch
Makita® GA4534 Angle Grinder, 4-1/2 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 120 VAC, 2-Stage Safety Paddle Switch
-
BrandMakita®
-
UPC088381606196
-
Manufacturer Part NumberGA4534
-
CountryCanada
-
Tool/KitBare Tool
-
Handle TypeBarrel Grip/Side
-
Voltage Rating120 V AC
-
Control TypeSingle Speed
-
Cord TypeCorded
-
Wheel Diameter4-1/2 in
-
Amperage Rating6 A
-
Arbor/Shank Size5/8-11 UNC
-
Dimensions10-3/8 in L
-
Sound Level86 dBA
-
Speed11000 rpm
-
Switch Type2-Stage Safety Paddle
- Re-designed gear housing for enhanced shaft lock durability
- Labyrinth construction features a complex series of channels to prevent penetration of dust and debris into the field and armature for maximum operational life
- Motor winding protection features "zig-zag" varnish on the armature and hardened powder on the field coils to act as an impenetrable barrier to dust and debris
- Rotatable gear housing can be positioned at every 90 deg for optimal positioning
- Removable side handle can be mounted on left or right side of tool
- Slim housing design for easy handling and maneuverability
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 14F097 |
| Grainger | 14F097 |
| Grainger | 14F097 |
-
UNSPSC27112749
-
Package DescriptionEACH
-
Warranty1 year Limited
-
Specification Sheet
-
Instruction/Installation Manual
-
Line Drawing
Recently Viewed
Makita® GA4534 Angle Grinder, 4-1/2 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 120 V AC, 2-Stage Safety Paddle Switch
Makita® GA4534 Angle Grinder, 4-1/2 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 120 VAC, 2-Stage Safety Paddle Switch
73.5" X 1/2" 18 TOOTH BM BANDSAW BLADE-MLF1/2X73.5X18T >
Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 V AC, 13-3/4 in OAL
Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 VAC, 13-3/4 in OAL
Hougen® Rotabroach® 12260 12000 Annular Cutter, 1-7/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Koyo 5310 53 Series Caged Cylindrical Bore Medium Angular Contact Ball Bearing, 50 mm Dia Bore, 110 mm Dia Outside, 2 Rows, 44.4 mm W, 24 deg, 111 kN Dynamic/67 kN Static Load
Angular contact ball bearings are suitable for applications which require high accuracy and good high-speed performance. This type of bearing is designed to carry a combined load.
120.5" X 1/2" 14 TOOTH BANDSAW BLADE-MLF1/2X120.5X14T >
