Milwaukee 1/2" DRILLS--USE "MWK" 0299-20
Built to handle industrial and construction applications with ease. The 1/2 in. magnum® drill with all-metal keyless chuck has the raw power of a Milwaukee-built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under one minute. Detach the Quik-Lok® cord easily for storage or service replacement.
-
BrandMilwaukee®
-
UPC045242000197
-
Manufacturer Part Number0235-21
-
CountryUSA|Canada
-
Tool/KitKit
-
Chuck Size1/2 in
-
Chuck Type1-Sleeve/Keyless
-
ColorRed
-
TypeGrounded
-
Handle TypePistol Grip
-
Voltage Rating120 V AC
-
Control TypeSpindle Lock/Variable Speed Trigger Switch
-
Amperage Rating5.5 A
-
Housing MaterialPlastic
-
Speed950 rpm
-
Overall Length10-1/2 in
- Powerful 5.5 A motor - delivers up to 950 rpm, with trigger speed control and reverse
- Heavy duty keyless chuck - single sleeve all-metal chuck for high grip strength and reduced slippage
- Quik-Lok™ cord - 8 ft 3-wire grounded rubber cord provides easy storage and field replacement
- Exclusive brush cartridge system - changes brushes in less than one minute, and includes a spare set of brushes
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 706W86 |
-
Alternative Part Number8563431
-
UNSPSC27112703
-
IDEA Index ID8563431
-
Package Description1/PK
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|UL Listed
-
Warranty5 years
-
Owners/User Manual
Recently Viewed
Built to handle industrial and construction applications with ease. The 1/2 in. magnum® drill with all-metal keyless chuck has the raw power of a Milwaukee-built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under one minute. Detach the Quik-Lok® cord easily for storage or service replacement.
97-DB 12/24-V BACK-UP ALARMS-NASBA1A>
Bussmann Bullet™ ECSR40 Current Limiting Time Delay Fuse, 40 A, 600 V, 200 kAIC Interrupt, RK5 Class, Cartridge Body
Edison's UL Class RK5 dual-element, time-delay fuses provide economical solutions to overcurrent protectioni. Available in both 250Vac and 600Vac, with 200kA RMS Sym interrupting ratings and sizes ranging from 0 to 600 amp.
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
FYH® NA211 34 NA Series Cylindrical Insert Bearing, 2-1/8 in Dia Bore, 2.81 in W, 43.4 kN Dynamic/29.4 kN Static Load
FYH® NA211 34 NA Series Cylindrical Insert Bearing, 2-1/8 in Dia Bore, 2.81 in W, 43.4 kN Dynamic/29.4 kN Static Load
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
