8-JE S-FLEX COUPLING INSERT/SLEEVE IDC 8-JE
S-FLEX COUPLING INSERTS
Recently Viewed
S-FLEX COUPLING INSERTS
ILSCO® NIMBUS® PBTS-2-350 Type PBTS 1-Sided Entry 2-Port Dual Rated Insulated Multi-Tap Connector, Aluminum/Copper Conductor, Aluminum
ILSCO® NIMBUS® PBTS-2-350 Type PBTS 1-Sided Entry 2-Port Dual Rated Insulated Multi-Tap Connector, Aluminum/Copper Conductor, Aluminum
Proto® TorquePlus™ J72105M Impact Socket Set, 12 Pieces, Square Drive, Alloy Steel, Black Oxide
Milwaukee® 48-20-5160 Heavy Duty Thick Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5175 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
Browning® 3694882 Split Taper Bushing, 2 in Dia Bore, 2.5567 in Small End/2.625 in Large End Dia Barrel, 3-11/16 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
19 TOOTH SPROCKETS FOR #80 CHAIN-BRWH80SK19 >
