BANJO MTF-220-BD 2" FULL PORT FLANGE X 2" FEMALE THREAD BOTTOM DRAIN BULKHEAD FITTING. POLY MATERIAL WITH EPDM GASKET MAX PRESSURE OF 300 PSI
BOLT HEAD PLUGS SEALED ULTRASONICALLY. GLASS REINFORCED POLYPROPYLENE, EDPM GASKET. GROOVE ALLOWS MORE DRAINAGE.
-BAJMTF220BD >
Recently Viewed
BANJO MTF-220-BD 2" FULL PORT FLANGE X 2" FEMALE THREAD BOTTOM DRAIN BULKHEAD FITTING. POLY MATERIAL WITH EPDM GASKET MAX PRESSURE OF 300 PSI
BOLT HEAD PLUGS SEALED ULTRASONICALLY. GLASS REINFORCED POLYPROPYLENE, EDPM GASKET. GROOVE ALLOWS MORE DRAINAGE.
-BAJMTF220BD >
BELT LACING RIVET WASHERS--PACK OF 50 - COVR5RW >
Gates® Power Transmission Poly Chain® GT®2 14MX-33S-37 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.68 in OD, 33 Grooves, 5.79 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
THE PRECISION BRAND RECTANGULAR KEYSTOCK IS EASY TO USE. THIS ITEM HAS A 1/2" THICKNESS. ANOTHER IMPORTANT CONSIDERATION IS THE ZINC PLATED FINISH. THIS RECTANGULAR KEYSTOCK IS MADE OF STEEL WITH A FINISH. THE OVERALL LENGTH AND WIDTH ARE 12" X 5/8".
-PRC15525 >
CRC® 14070 Minute Mend™ Non-Flammable Epoxy Putty, 4 oz Stick, Putty Form, Green/White, 1.98
This two part epoxy permanently repairs scratches, gouges and holes. Bonds to wood, steel, fiberglass, glass, ceramics, plastics, concrete and aluminum. Also bonds to both wet and dry surfaces. It is ready to use in less than one minute.
Gates® Power Transmission MegaCrimp™ 8G-8FJX G25 Straight Hydraulic Coupling, 1/2 in x 3/4-16 Nominal, Hose x 37 deg Female JIC Flare Swivel, Carbon Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
