CRC® 14070 Minute Mend™ Non-Flammable Epoxy Putty, 4 oz Stick, Putty Form, Green/White, 1.98
This two part epoxy permanently repairs scratches, gouges and holes. Bonds to wood, steel, fiberglass, glass, ceramics, plastics, concrete and aluminum. Also bonds to both wet and dry surfaces. It is ready to use in less than one minute.
-
BrandCRC®
-
UPC078254140704
-
Manufacturer Part Number14070
-
CountryUSA
-
Temperature Rating250 deg F
-
Flammability Rating1 HMIS/NFPA
-
Flash Point>200 deg F
-
FormPutty
-
ColorGreen/White
-
TypeNon-Flammable
-
CompositionTalc (Not Containing Asbestos Fibers), Glass, Oxide, Chemicals, Bisphenol A-(Epichlorhydrin) Epoxy Resin (Reaction Product), Titanium Dioxide, 3, 6-Diazaoctanethylenediamin
-
Container Size4 oz
-
Container TypeStick
-
Net Weight4 oz
-
Application Time1 hr
-
SeriesMinute Mend™
-
Shear Strength800 to 1000 lb
-
Base TypeTalc, Epoxy Resin
-
Specific Gravity1.98
-
Odor/ScentPungent/Sulfur
-
Drying Time1 hr
- Repairs scratches, gouges and holes
- Bonds to wood, steel, fiberglass, glass, ceramics, plastics, concrete and aluminum
- Also bonds to both wet and dry surfaces
- It is ready to use in less than one min
- 300 V dielectric strength
- 5 years of shelf life
- 446 deg F boiling point
- Non-flammable
- Safe on most plastic
- Permanently repairs scratches, gouges and holes in drums, tanks, pipes, castings, molds, sinks, tubs and leaky gaskets
- Perform routine electrical jobs such as mounting terminal blocks, packing wires and repairing breaker boxes
- Ideal for stopping leaks, can even be used under water
- Can be used in plumbing, electrical, ceramic, vehicle and machinery repair
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 13P449 |
| MSC | 90077918 |
| Fastenal | 63326 |
-
Alternative Part Number1004796
-
UNSPSC31201605
-
IDEA Index ID8426068
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|RoHS Compliant|PROP65: Reproductive Harm - www.P65Warnings.ca.gov
-
Specification Sheet
Recently Viewed
CRC® 14070 Minute Mend™ Non-Flammable Epoxy Putty, 4 oz Stick, Putty Form, Green/White, 1.98
This two part epoxy permanently repairs scratches, gouges and holes. Bonds to wood, steel, fiberglass, glass, ceramics, plastics, concrete and aluminum. Also bonds to both wet and dry surfaces. It is ready to use in less than one minute.
The tapper anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The tapper concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
4" CPVC SCH-80 PLASTIC PIPE (FT)-NIBCPVCC80400 >
BBI 489157 Fully Threaded Carriage Bolt, 3/4-10, 4 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489157 Fully Threaded Carriage Bolt, 3/4-10, 4 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
Alemite® 7531-4 Manual Grease Pump, Grease, 35 lb Container, 0.2 oz/Stroke Flow Rate
MCR Safety TK132 Tomahawk® Single Lens Safety Glasses With Side Shields, Duramass® Hard Coat, Gray Lens, Wrap Around Frame, Blue/Red/White, Nylon Frame, Polycarbonate Lens, ANSI Z87+, AS/NZS 1337.1, CAN/CSA Z94.3, CE EN166
