Sioux Chief FullFlush™ 889-POM Open Offset Closet Flange With Stainless Steel Swivel Ring, PVC
Sioux Chief 889 series full flush closet flanges shall be used where necessary in drainage systems. Flange shall allow 1-1/2 in offset in any direction and have a full-swivel, corrosion-proof stainless steel ring with sufficient holes for securing to floor and slots for inserting closet bolts. Flange shall have an offset inner diameter area properly sized to allow full 3 in spherical flow for complete drainage and clog resistance. Flange shall have a 3 in SCH 40/STD hub connection which conforms to ASTM D2665 (PVC). Closet flange shall be UPC listed. Always fasten closet flanges to the floor.
-
BrandSioux Chief
-
UPC739236305688
-
Manufacturer Part Number889-POM
-
CountryUSA|Canada
-
Pipe Size3 to 4 in
-
MaterialPVC
-
ColorWhite
-
TypeOpen Offset
-
Series889
- Corrosion-resistant 430 stainless steel swivel ring
- Allows for 1-1/2 in offset in any direction for closet bowl setting
- Full-flow, 3 in I.D. throat
- No Restriction
- Moveable metal ring allows exact alignment of bolts and screws
- 1.42 in offset allows a margin of error for drain pipe/toilet flange alignment
- 6 screw holes to secure flange to the floor
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | S889POM |
-
UNSPSC40174803
-
Package DescriptionEACH
-
Standards/ApprovalsASTM D2665|ASTM D2661|UPC Listed
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
Sioux Chief FullFlush™ 889-POM Open Offset Closet Flange With Stainless Steel Swivel Ring, PVC
Sioux Chief 889 series full flush closet flanges shall be used where necessary in drainage systems. Flange shall allow 1-1/2 in offset in any direction and have a full-swivel, corrosion-proof stainless steel ring with sufficient holes for securing to floor and slots for inserting closet bolts. Flange shall have an offset inner diameter area properly sized to allow full 3 in spherical flow for complete drainage and clog resistance. Flange shall have a 3 in SCH 40/STD hub connection which conforms to ASTM D2665 (PVC). Closet flange shall be UPC listed. Always fasten closet flanges to the floor.
36" X 60" NYLON POLYESTER AMERICAN FLAG-FLA3X5USA >
24" NEOPRENE DRIVEWAY SQUEEGEE (HEAD ONLY) - MAG4124TPNHEAD >
Drop forged, galvanized wire rope clips provide strength and support for the most heavy- duty rigging jobs. Our domestic clips from Crosby® feature the distinctive Red-U-Bolt®, for quick visual identification and the assurance of genuine Crosby® made in the USA quality.
Wire rope clips are most commonly used with wire rope assemblies, with two or three clips generally required to properly secure the wire rope's ends. It's important to note that wire rope clips are not intended for use in overhead lifting applications.
The G-450 series from Crosby® features a traditional style U-bolt and saddle secured with nuts, with the entire clip galvanized to resist rust and corrosion. Sizes 1/8" through 2-1/2" and 3" have a forged base. They offer an efficiency rating of 80% for 1/8''through 7/8'' sizes, and 90% for sizes 1" through 3-1/2" (based on the catalog breaking strength of wire rope used). Clip sizes up through 1-1/2" have rolled threads.
RBC® IR7235 Pitchlign® Heavy Duty Inner Ring, 1 in ID x 1-1/4 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
GARVIN® STR150-SS 2-Piece Strut Clamp, 1-1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1-1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
