10-56-PT BLP MOBILE PAINTS
1-PT RUS-KIL SAFETY YELLOW PAINT-BLP1056PT >
Recently Viewed
1-PT RUS-KIL SAFETY YELLOW PAINT-BLP1056PT >
ALE 10THHNYEL 10-THHN YELLOW STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNYEL >
Sioux Chief FullFlush™ 889-POM Open Offset Closet Flange With Stainless Steel Swivel Ring, PVC
Sioux Chief 889 series full flush closet flanges shall be used where necessary in drainage systems. Flange shall allow 1-1/2 in offset in any direction and have a full-swivel, corrosion-proof stainless steel ring with sufficient holes for securing to floor and slots for inserting closet bolts. Flange shall have an offset inner diameter area properly sized to allow full 3 in spherical flow for complete drainage and clog resistance. Flange shall have a 3 in SCH 40/STD hub connection which conforms to ASTM D2665 (PVC). Closet flange shall be UPC listed. Always fasten closet flanges to the floor.
36" X 60" NYLON POLYESTER AMERICAN FLAG-FLA3X5USA >
24" NEOPRENE DRIVEWAY SQUEEGEE (HEAD ONLY) - MAG4124TPNHEAD >
Drop forged, galvanized wire rope clips provide strength and support for the most heavy- duty rigging jobs. Our domestic clips from Crosby® feature the distinctive Red-U-Bolt®, for quick visual identification and the assurance of genuine Crosby® made in the USA quality.
Wire rope clips are most commonly used with wire rope assemblies, with two or three clips generally required to properly secure the wire rope's ends. It's important to note that wire rope clips are not intended for use in overhead lifting applications.
The G-450 series from Crosby® features a traditional style U-bolt and saddle secured with nuts, with the entire clip galvanized to resist rust and corrosion. Sizes 1/8" through 2-1/2" and 3" have a forged base. They offer an efficiency rating of 80% for 1/8''through 7/8'' sizes, and 90% for sizes 1" through 3-1/2" (based on the catalog breaking strength of wire rope used). Clip sizes up through 1-1/2" have rolled threads.
