Tubular Flush Ells & Slip Ells
3/4" X 1/2" S-80 CPVC SXS BUSHING-NIB1837101 >
1" X 1/2" SCH-80 CPVC SXS BUSHING-NIB1837130 >
1" X 3/4" SCH-80 CPVC SXS BUSHING-NIB1837131 >
1-1/4" X 1/2" S-80 CPVC SXS BUSHING-NIB1837166 >
1-1/4" X 3/4" S-80 CPVC SXS BUSHING-NIB1837167 >
1-1/4" X 1" S-80 CPVC SXS BUSHING-NIB1837168 >
1-1/2" X 1/2" SCH-80 CPVC SXS BUSHING-NIB1837209 >
1-1/2" X 3/4" S-80 CPVC SXS BUSHING-NIB1837210 >
1-1/2" X 1" SCH-80 CPVC SXS BUSHING-NIB1837211 >
1-1/2" X 1-1/4" S-80 CPVC SXS BUSHING-NIB1837212 >
CPVC SXS BUSHING-NIB1837248>
2" X 1" SCH-80 CPVC SXS BUSHING-NIB1837249 >
2" X 1-1/4" S-80 CPVC SXS BUSHING-NIB1837250 >
2" X 1-1/2" S-80 CPVC SXS BUSHING-NIB1837251 >
2-1/2" X 1-1/2" S-80 CPVC SXS BUSHING-NIB1837291 >
2-1/2" X 2" S-80 CPVC SXS BUSHING-NIB1837292 >
3" X 2" SCH-80 CPVC SXS BUSHING-NIB1837338 >
4" X 2" SCH-80 CPVC SXS BUSHING-NIB1837420 >
4" X 3" SCH-80 CPVC SXS BUSHING-NIB1837422 >
6" X 4" SCH-80 CPVC BUSHING-NIB1837640 >
PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
Recently Viewed
GEARWRENCH® 85956 XL Series Double Slim Box End Wrench, 1/2 in Wrench, 12 Points, 0 deg Offset, 11.31 in OAL, Alloy Steel, Polished Chrome
The GEARWRENCH XL GEARBOX™ Double Box End metric ratcheting wrenches need as little as 5-Degrees to move the fastener as opposed to 30 degrees for standard box end wrenches. The standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn, rusted fastener. The ratcheting box end then makes the loosening or tightening of the fastener fast and safe. The box end features improved box end strength from GEARWRENCH's Off-Corner Loading and at the same time, reduces fastener rounding. The double box end ratcheting wrenches are made from the finest chrome vanadium steel for precision long lasting tool life. Comes with a blow molded carrying case that can be hung on a wall or keep your wrenches organized in your tool box or rollaway.
TAPER-ID SELF-ALIGNING BALL BEARING - GUL1320K>
Dodge® 370116 First Stage Pinion Gear, 49 Diametral Pitch, 83 Teeth, 0.9 in Dia Pitch
Dodge® 370116 First Stage Pinion Gear, 49 Diametral Pitch, 83 Teeth, 0.9 in Dia Pitch
1-1/2" X 60-YDS MASKING TAPE-UTCUT77112 >
Proto® TorquePlus™ J5021MH Deep Length Socket, Metric, 3/8 in Square Drive, 21 mm
2-5/16" EXTERNAL RETAINING RING-ANR1400231 >
