PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
-
BrandPlumbPak®
-
UPC046224005988
-
Manufacturer Part Number4815K
-
CountryUSA
-
FinishPolished Chrome
-
MaterialBrass
-
Gauge22 ga
-
Nominal Size1-1/2 in Slip Joint
-
Dimensions16 in L
-
Suitable For Use WithBrass Tubular
- Complete outlet kit for a double bowl sink
-
UNSPSC40141700
-
Package Description3/PK
-
Standards/ApprovalsProp 65 WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm
-
WarrantyLimited
-
Catalog
Recently Viewed
PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
150 WATT GREEN FLOODLIGHT HOLDERS WITH 6' CORD, INDOOR OR OUTDOOR USE-ECI05706 >
Remke Tuff-Seal™ 7304-002R Closed Mesh Single Eye Wide Range Bus Drop Grip, 450 lb Breaking Strength, 0.3 to 0.43 in Cable, Steel, Galvanized
3/4" PIPE CLAMP-JWH319881 >
WATTS® 0009280 LF25AUB-Z3 Pressure Reducing Valve, 3/4 in Nominal, FNPT Union x FNPT End Style, 10 to 35 psi Pressure, Cast Copper Silicon Alloy Body
This 3/4 inch lead free brass water pressure reducing valve for low pressure ranges is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). The low pressure range is 10 to 35 psi (69 to 241 kPa) with the standard setting at 30 psi (207 kPa).
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
