Tubular Flush Ells & Slip Ells
3/4" X 1/2" S-80 CPVC SXS BUSHING-NIB1837101 >
1" X 1/2" SCH-80 CPVC SXS BUSHING-NIB1837130 >
1" X 3/4" SCH-80 CPVC SXS BUSHING-NIB1837131 >
1-1/4" X 1/2" S-80 CPVC SXS BUSHING-NIB1837166 >
1-1/4" X 3/4" S-80 CPVC SXS BUSHING-NIB1837167 >
1-1/4" X 1" S-80 CPVC SXS BUSHING-NIB1837168 >
1-1/2" X 1/2" SCH-80 CPVC SXS BUSHING-NIB1837209 >
1-1/2" X 3/4" S-80 CPVC SXS BUSHING-NIB1837210 >
1-1/2" X 1" SCH-80 CPVC SXS BUSHING-NIB1837211 >
1-1/2" X 1-1/4" S-80 CPVC SXS BUSHING-NIB1837212 >
CPVC SXS BUSHING-NIB1837248>
2" X 1" SCH-80 CPVC SXS BUSHING-NIB1837249 >
2" X 1-1/4" S-80 CPVC SXS BUSHING-NIB1837250 >
2" X 1-1/2" S-80 CPVC SXS BUSHING-NIB1837251 >
2-1/2" X 1-1/2" S-80 CPVC SXS BUSHING-NIB1837291 >
2-1/2" X 2" S-80 CPVC SXS BUSHING-NIB1837292 >
3" X 2" SCH-80 CPVC SXS BUSHING-NIB1837338 >
4" X 2" SCH-80 CPVC SXS BUSHING-NIB1837420 >
4" X 3" SCH-80 CPVC SXS BUSHING-NIB1837422 >
6" X 4" SCH-80 CPVC BUSHING-NIB1837640 >
PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
PlumbPak® 4815K End Outlet Continuous Waste With Cast Tee, 1-1/2 in Slip Joint Nominal, 22 ga, Brass, Polished Chrome
Recently Viewed
Lincoln® 90776 Easy Out Grease Fitting Tool, 1/8 in Thread Size
A combination tool used to remove worn or broken fittings and to retap holes for installation of new fittings. Tool contains sockets for removing both straight and angle fittings. May also be used to remove old pin-type fittings.
Streamlight® 88065 ProTac® HL® X Dual Fuel High Lumen Tactical Flashlight, C4® LED Bulb, Aircraft Aluminum Housing, 65 to 1000 Lumens Lumens
New technology for the ProTac® HL-X gives users 1,000 Lumens of high lumen output, as well as the flexibility of multiple power sources, which helps reduce down time.
This medium-duty, 200 AMP electrode holder holds the stick electrode and transfers the welding current to the rod. This rod holder is easy to use, and accepts up to No.2 welding cable and 5/32 inch electrodes. Insulated for safety and maximum operator protection.
Coilhose® BL10 Heavy Duty Mechanical Tool Balancer, 6.5 to 13.5 lb Load, 8 ft L Cable
Coilhose® BL10 Heavy Duty Mechanical Tool Balancer, 6.5 to 13.5 lb Load, 8 ft L Cable
80-GRIT HONE STONE SET - LIS15500>
MORSE® 15183 1436 General Purpose Screw Machine Drill, H Drill - Letter, 0.266 in Drill - Decimal Inch, HSS, Bright
MORSE® 15183 1436 General Purpose Screw Machine Drill, H Drill - Letter, 0.266 in Drill - Decimal Inch, HSS, Bright
