2-1/2X1-1/2BR 2-1/2" X 1-1/2" Black
2-1/2" X 1-1/2" BLACK REDUCER-JPW21/2X11/2BR >
Recently Viewed
2-1/2" X 1-1/2" BLACK REDUCER-JPW21/2X11/2BR >
Dichtomatik N70204 O-Ring, 204 Dash Number, 0.359 in ID x 0.637 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1/8" X 12" SQUARE ZINC KEYSTOCK-OHSSK125 >
Flex-Hone® BC11218 BC Series Small Diameter Standard Duty Flexible Cylinder Hone, 1-1/2 in Dia Bore, 3 in L Abrasive, 8 in OAL, 180 Grit
The BC Series Flex-Hone® tool is designed for use on any type or size of cylinder from 4 mm up to 3 in Dia. This cylinder hone is designed for surface finishing and cross hole deburring in brake cylinders, wheel cylinders, hydraulics, pneumatics and valve guides.
Flex-Hone® GBD61218 Heavy Duty Flexible Cylinder Hone, 6-1/2 in Dia Bore, 6-1/4 in L Abrasive, 17-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
