Wagner by Diversitech WG840589 Direct Drive Furnace Blower Motor, OAO Enclosure, 3/4 hp, 115 V AC, 60 Hz, 1 ph, 48 Frame, 1075 rpm Speed, Belly Band/Shaft Up/Down Mount
This Wagner® WG840589 Direct Drive Furnace Blower Motors, 3/4 HP, 1075/3 RPM, 9.5 FLA, 115V motor installs with all standard 48 frame mounting brackets. It is protected by an automatic overload and class B insulation. The motor is electrically reversible and features 36 in. leads to ease installation.
-
BrandWagner by Diversitech
-
Manufacturer Part NumberWG840589
-
CountryUSA
-
Temperature Rating140 deg F
-
Frame48
-
Frequency Rating60 Hz
-
Mounting TypeBelly Band/Shaft Up/Down
-
RotationReversible
-
Voltage Rating115 V AC
-
Amperage Rating11.3 A Full Load
-
Application TypeCondenser Fan Motors, Fan & Blower Motors
-
Service Factor1
-
Horsepower3/4 hp
-
Shaft Size1/2 in Dia x 4-1/2 in L
-
Dimensions5.59 in Dia x 10.39 in L
-
Bearing TypeSleeve
-
Number of Speeds3
-
Insulation ClassClass B
-
Speed1075 rpm
-
Enclosure TypeOAO
-
Phase1
- Motors feature reversing plugs, extended thru bolts, 36 in leads and low power consumption
- Ball bearing design allows for greater heat endurance, improved performance, increased reliability, and enhanced motor life
- Extended mounting bolts provides easier installation in cramped spaces and allows the installer to start the threaded mounting nut quickly and efficiently
-
UNSPSC26101100
-
Package DescriptionEACH
-
Warranty2 Years
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
This Wagner® WG840589 Direct Drive Furnace Blower Motors, 3/4 HP, 1075/3 RPM, 9.5 FLA, 115V motor installs with all standard 48 frame mounting brackets. It is protected by an automatic overload and class B insulation. The motor is electrically reversible and features 36 in. leads to ease installation.
SCOTCHBRITE TOWELS--CS/50-MMM2011WHT >
Browning 1-3/16"-ID 2-BOLT TRB PILLOW BLOCK BRW PBE-920 X 1.3/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Dixon® NG60 Flange Gasket, Neoprene, 6 in Nominal, 8-3/4 in OD x 1/16 in THK, Class 150 Class, Domestic
Dixon® NG60 Flange Gasket, Neoprene, 6 in Nominal, 8-3/4 in OD x 1/16 in THK, Class 150 Class, Domestic
1/2X5/8X5/8" TAPPED THRU-PDTSG5041410T >
Rubbermaid® FG131542BLA Rotational Molded Standard Duty Forkliftable Tilt Truck, 1250 lb Load, 1 cu-yd Volume, Black, HDPE, 72.2 in OAL
The BRUTE Forkliftable Tilt Truck offers industrial strength construction to transport heavy loads up to 1,250 lbs. These dump trucks feature the DuraTilt™ frame that allows one user to dump and clean the tilt truck, and reinforced corner points that helps prevent scraping, and paint transfer onto the ground during dumping.
