Coilhose® PE0810-100K Tubing, 6 mm ID x 8 mm OD x 100 ft L, 1 mm THK Wall, Extrusion, Polyethylene, Domestic
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our polyethylene tubing is extruded from high-quality resin. Compatible with Coilock™ push-to-connect fittings.
-
BrandCoilhose®
-
UPC029292916752
-
Manufacturer Part NumberPE0810-100K
-
CountryUSA
-
Temperature Rating-40 to 150 deg F
-
MaterialPolyethylene
-
Method of ManufactureExtrusion
-
ColorBlack
-
Wall Thickness1 mm
-
Working Pressure140 psi
-
Inside Diameter6 mm
-
Domestic/ImportDomestic
-
Outside Diameter8 mm
-
Length100 ft
- 140 psi at 75 deg F
-
UNSPSC40183000
-
Standards/ApprovalsFDA Approved|NSF 51
Recently Viewed
Coilhose® PE0810-100K Tubing, 6 mm ID x 8 mm OD x 100 ft L, 1 mm THK Wall, Extrusion, Polyethylene, Domestic
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our polyethylene tubing is extruded from high-quality resin. Compatible with Coilock™ push-to-connect fittings.
17 TOOTH SPROCKETS FOR #40 CHAIN
BBI 221199 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 4-1/2 in L Shoulder, 1/2-13
BBI 221199 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 4-1/2 in L Shoulder, 1/2-13
108 AIR CONDITIONER CORD-JWH528904 >
36-T SPROCKETS FOR #60 CHAIN IDC 60-B-36-F-1-1/2
36 TOOTH SPROCKETS FOR #60 CHAIN
All PVC SCH 80/XH fittings shall be produced by Spears® manufacturing company from PVC type I, cell classification 12454, conforming to ASTM Standard D1784. All injection molded PVC SCH 80/XH fittings shall be certified for potable water service by NSF® international manufactured in strict compliance to ASTM D2467. All fabricated fittings shall be produced in accordance with Spears® general specifications for fabricated fittings. All PVC flanges shall be designed and manufactured to meet CL150 bolt pattern per ANSI Standard B16.5 and rated for a maximum internal pressure of 150 psi, non-shock at 73 deg F.
