Polyethylene Tubing
1/4" -OD POLYETHYLENE TUBING IS FLEXIBLE AND CRACK RESISTANT. OPERATING TEMPERATURES IS 150 DEGREES F TO -76 DEGREES F. SOLD IN 100 FOOT ROLL.-JWH426872 >
3/8" -OD POLYETHYLENE TUBING IS FLEXIBLE AND CRACK RESISTANT. OPERATING TEMPERATURES IS 150 DEGREES F TO -76 DEGREES F. SOLD IN 100 FOOT ROLL.-JWH426881 >
3/8" -OD POLYETHYLENE TUBING IS FLEXIBLE AND CRACK RESISTANT. OPERATING TEMPERATURES IS 150 DEGREES F TO -76 DEGREES F. SOLD BY THE FOOT-JWH426881FT >
3/16" ID 5/16"OD POLY TUBE--ROLL OF 300'-JWH453609>
3/8"-ID X 60" POLYBUTYLENE TUBE-JWH490008
1/2"-ID X 5' POLYBUTYLENE TUBE-JWH490016>
3/4"-ID X 5' POLYBUTYLENE TUBE-JWH490024>
1/4"-OD X .170"-ID POLYETHYLENE TUBE/TUBING MAXIMUM WORKING PRESSURE AT 75-DEGREES FARENHEIT: 173-PSI WALL THICKNESS: .040" COLOR: NATURAL
COILHOSE PNEUMATICS PRODUCTS PE-0417-100-R 1/4" -OD Red Poly Tube - RL/100'
PE0417-100R by Coilhose | Tubing | 1/4" OD x .170" ID | .040" Wall thickness | Red | Polyethylene | 100ft
COILHOSE PNEUMATICS PRODUCTS PE-0417-100-Y 1/4" -OD Yellow Poly Tube -RL/100'
PE0417-100Y by Coilhose | Tubing | 1/4" OD x .170" ID | .040" Wall thickness | Yellow | Polyethylene | 100ft
1/4"-OD X .170"-ID BLACK POLYETHYLENE TUBE/TUBING MAXIMUM WORKING PRESSURE AT 75-DEGREES FARENHEIT: 173-PSI WALL THICKNESS: .040" COLOR: BLACK
COILHOSE PNEUMATICS PRODUCTS PE-0465-100 2.7-MM X 4-MM Poly Tube - RL/100'
2.7-MM-ID X 4-MM-OD | POLYETHYLENE TUBING | WALL THICKNESS .65-MM | COLOR: NATURAL WP AT 75-DEGREES-F | TEMPERATURE RANGE | -40-DEGREES-F TO +150-DEGREES-F
COILHOSE PNEUMATICS PRODUCTS PE-1215-100 12-MM -OD X 9-MM Poly Tube - RL/100'
PE1215-100 by Coilhose | Tubing | 12mm OD x 9mm ID | 1.0 mm Wall thickness | Polyethylene | 100ft
PE3103 by Coilhose | Tubing | 5/16" OD x .236" ID | .038" Wall thickness | Natural | Polyethylene
Coilhose® PE0417-500G Tubing, 0.17 in ID x 1/4 in OD x 500 ft L x 0.4 in THK Wall, Polyethylene
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our PE Tubing is manufactured from high quality resins and extruded to close tolerances. We offer five popular sizes. Compatible with Coilock Fittings and Poly-Tube Fittings.
Coilhose® PE0610-100K Tubing, 4 mm ID x 6 mm OD x 100 ft L x 1 mm THK Wall, Polyethylene
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our PE Tubing is manufactured from high quality resins and extruded to close tolerances. We offer five popular sizes. Compatible with Coilock Fittings and Poly-Tube Fittings.
Coilhose® PE0810-100K Tubing, 6 mm ID x 8 mm OD x 100 ft L, 1 mm THK Wall, Extrusion, Polyethylene, Domestic
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our polyethylene tubing is extruded from high-quality resin. Compatible with Coilockâ„¢ push-to-connect fittings.
Coilhose® PE1010-100K Tubing, 8 mm ID x 10 mm OD x 100 ft L, 1 mm THK Wall, Extrusion, Polyethylene, Domestic
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our polyethylene tubing is extruded from high-quality resin. Compatible with Coilockâ„¢ push-to-connect fittings.
Outside Diameter (OD): 5/32" Inside Diameter (ID): 0.106"Working Pressure: 175 psi at room temperature Material: High-quality extruded polyethylene resin Fitting Compatibility: Works seamlessly with Coilock push-to-connect and standard poly-tube compression fittings.
Recently Viewed
GEARWRENCH® 82306 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 1 in Chisel, 15/16 to 3/8 in Punch, 19 Punches, 8 Chisels, 27 Pieces
The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.
Vaughan® 45001 Flat Stock Hex Body Rolling Head Super Bar Nail Puller, Angled/Claw Tip, 15 in OAL, Forged Spring Tempered Steel
Vaughan® 45001 Flat Stock Hex Body Rolling Head Super Bar Nail Puller, Gooseneck/Offset Claw Tip, 15 in OAL, Forged Spring Tempered Steel
32-OZ RUBBER MALLETS/HAMMERS-TABRM32 >
HCI Preferred Supplier 20063P Connector, 1/2 in Nominal, Push-In x MNPTF, Plastic
HCI Preferred Supplier 20063P Connector, 1/2 in Nominal, Push-In x MNPTF, Plastic
CSI FLASHLIGHT HOLSTER - NEB5089 >
40 In. Ditch Bank Blade Handle for 3-Hole Blades. Better-Quality American Hickory, clear lacquer, fire finish, Contractor Grade.
