GEARWRENCH® 82306 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 1 in Chisel, 15/16 to 3/8 in Punch, 19 Punches, 8 Chisels, 27 Pieces
The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.
-
BrandGEARWRENCH®
-
UPC099575823060
-
Manufacturer Part Number82306
-
CountryUSA|Canada
-
FinishBlack Phosphate
-
MaterialAlloy Steel
-
Punch Size15/16 to 3/8 in
-
Set Contents82261 1/4 x 4-3/4 x 1/4 in, 82262 3/8 x 5 x 5/16 in, 82263 7/16 x 5-1/2 x 3/8 in, 82264 1/2 x 6 x 3/8 in, 82265 5/8 x 6-1/2 x 3/8 in, 82266 3/4 x 7 x 5/8 in, 82267 7/8 x 7-1/2 x 3/4 in, 82268 1 x 8 x 7/8 in Cold Chisels, 82269 1/4 x 4-1/4 in, 82270 3/8 x 5 in, 82271 7/16 x 5-1/2 in Center Punches, 82272 3/32 x 4-3/4 x 5/16 in, 82273 1/8 x 5 x 5/16 in, 82274 5/32 x 5-1/4 x 5/16 in, 82275 3/16 x 5-1/2 x 5/16 in, 82276 1/4 x 7 x 3/8 in, 82277 5/16 x 7 x 1/2 in, 82278 1/8 x 8 x 3/8 in Long Taper Punches, 82279 5/32 x 8-1/2 x 1/2 in, 82280 3/16 x 9 x 1/2 in, 82281 1/4 x 11 x 5/8 in Long Taper Punches, 82282 5/32 x 5 x 3/8 in, 82283 3/16 x 5 x 3/8 in, 82284 1/4 x 6 x 1/2 in Starter Punches, 82285 1/8 x 4-1/2 x 5/16 in Starter, 82286 5/16 x 7 x 5/8 in and 82287 3/8 x 8 x 3/4 in Starter Punches
-
Number of Pieces27
-
Number of Punches19
-
Overall Length11 in
-
StyleCenter/Cold/Long Taper/Pin/Starting
- Precision hardened chisels for cutting metal rivets, bolts, and nuts
- Pin punches for driving out pins and rivets during final removal
- Center punches for marking center lines or pilot drill locations
- Long taper punch lets you install or remove pins and shafts, and aligns holes with ease
- Starter punches for both starting and installing pins or rivets
- Includes tool roll for storage and organization
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 39638960 |
| Grainger | 32RX45 |
| Fastenal | 0224614 |
-
UNSPSC27111505
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
-
Catalog
Recently Viewed
GEARWRENCH® 82306 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 1 in Chisel, 15/16 to 3/8 in Punch, 19 Punches, 8 Chisels, 27 Pieces
The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.
Vaughan® 45001 Flat Stock Hex Body Rolling Head Super Bar Nail Puller, Angled/Claw Tip, 15 in OAL, Forged Spring Tempered Steel
Vaughan® 45001 Flat Stock Hex Body Rolling Head Super Bar Nail Puller, Gooseneck/Offset Claw Tip, 15 in OAL, Forged Spring Tempered Steel
32-OZ RUBBER MALLETS/HAMMERS-TABRM32 >
HCI Preferred Supplier 20063P Connector, 1/2 in Nominal, Push-In x MNPTF, Plastic
HCI Preferred Supplier 20063P Connector, 1/2 in Nominal, Push-In x MNPTF, Plastic
CSI FLASHLIGHT HOLSTER - NEB5089 >
40 In. Ditch Bank Blade Handle for 3-Hole Blades. Better-Quality American Hickory, clear lacquer, fire finish, Contractor Grade.
