Coilhose® PFE61000T Flexeel® PFE6 Straight Air Hose, 3/8 in, 1000 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
-
BrandCoilhose®
-
UPC029292921176
-
Manufacturer Part NumberPFE61000T
-
CountryUSA
-
Temperature Rating-40 to 165 deg F
-
MaterialReinforced Polyurethane
-
ColorClear Blue
-
TypeStraight
-
Nominal Size3/8 in
-
SeriesFlexeel® PFE6
-
Working Pressure200 psi at 70 deg F
-
Domestic/ImportDomestic
-
Outside Diameter9/16 in
-
Length1000 ft
- Offers an excellent alternative to much bulkier rubber hoses
- Constructed of lightweight, tough reinforced polyurethane
- Withstands constant flexing, even in subzero conditions
- Kink and abrasion resistant
- Much lighter than other comparably sized hoses
- Very small bend radius
- Resistant to chemicals, water, fuel, oil and fungus
- Non-marring to furniture and auto finishes
- High quality brass fittings provide strong and durable connection
- Ends are completely field repairable
- 28 in hg Vacuum rating
-
UNSPSC40142002
-
Package Description1/PK
-
Specification Sheet
-
Catalog
Recently Viewed
Coilhose® PFE61000T Flexeel® PFE6 Straight Air Hose, 3/8 in, 1000 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
MORSE® 95837 5980 Center Cutting Honed Edge Regular Length Single End Mill, 1/2 in Dia Cutter, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Aluminum Chromium Titanium Nitride
MORSE® 95837 5980 Center Cutting Honed Edge Regular Length Single End Mill, 1/2 in Dia Cutter, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Aluminum Chromium Titanium Nitride
Flexzilla® HFZ3850YW2 Air Hose With 1/4 in Fitting, MNPT End Style, 50 ft L, 300 psi Working, Hybrid Polymer
Flexzilla® is a revolutionary hose featuring a flexible hybrid polymer material that redefines flexibility. This engineered polymer blend material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla® hose characteristics offer zero memory allowing it to lay flat. It won't work against you during operation and coils easily after use. Flexzilla® offers extreme all weather flexibility, even in subzero conditions and is ideal in both hot and cold environments where tight radius bends are needed.
Coilhose® CH10 Ball Chuck and Clip, 1/4 in FPT Thread, Brass, Domestic
Coilhose® CH10 Ball Chuck and Clip, 1/4 in FPT Thread, Brass, Domestic
MORSE® 45314 4640C Center Cutting Regular Length Roughing End Mill, 5/8 in Dia Cutter, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, TiCN Coated
MORSE® 45314 4640C Center Cutting Regular Length Roughing End Mill, 5/8 in Dia Cutter, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, TiCN Coated
MORSE® 44467 4593 Non-Center Cutting Single End Roughing End Mill, 1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
MORSE® 44467 4593 Non-Center Cutting Single End Roughing End Mill, 1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
