Coilhose® PFE4500T Flexeel® PFE4 Straight Air Hose, 1/4 in, 500 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
-
BrandCoilhose®
-
UPC029292503037
-
Manufacturer Part NumberPFE4500T
-
CountryUSA
-
Temperature Rating-40 to 165 deg F
-
MaterialReinforced Polyurethane
-
ColorClear Blue
-
TypeStraight
-
Nominal Size1/4 in
-
SeriesFlexeel® PFE4
-
Working Pressure200 psi at 70 deg F
-
Domestic/ImportDomestic
-
Outside Diameter3/8 in
-
Length500 ft
- Offers an excellent alternative to much bulkier rubber hoses
- Constructed of lightweight, tough reinforced polyurethane
- Withstands constant flexing, even in subzero conditions
- Kink and abrasion resistant
- Much lighter than other comparably sized hoses
- Very small bend radius
- Resistant to chemicals, water, fuel, oil and fungus
- Non-marring to furniture and auto finishes
- High quality brass fittings provide strong and durable connection
- Ends are completely field repairable
- 28 in hg Vacuum rating
-
UNSPSC40142002
-
Package Description1/PK
-
Specification Sheet
-
Catalog
Recently Viewed
Coilhose® PFE4500T Flexeel® PFE4 Straight Air Hose, 1/4 in, 500 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
Gulf Bearing 7/16" DOUBLE-SEALED BALL BEARINGS GUL 1620-2-RS
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
4-1/2" x 7/8" 40 Grit Flap Disc
NSK is the World Leader in Deep Groove Ball Bearings. Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
1" X 2" GREENEX TRA HEAVY OVAL DIE SPRINGS-LANSEHO1000200 >
Dixon® 400-G-BU Cam and Groove Gasket, 4 in Nominal, 4 in ID x 4-7/8 in OD x 1/4 in THK, Buna-N, Domestic
Dixon® 400-G-BU Cam and Groove Gasket, 4 in Nominal, 4 in ID x 4-7/8 in OD x 1/4 in THK, Buna-N, Domestic
