Kuri Tec® HS1174-08X50 HS1174 Hose, Male NPT End Style, 50 ft L, 300 psi Working, PVC, Import
Kuri Tec® HS1174-08X50 HS1174 Hose, Male NPT End Style, 50 ft L, 300 psi Working, PVC, Import
-
BrandKuri Tec®
-
UPC822353072783
-
Manufacturer Part NumberHS1174-08X50
-
CountryUSA
-
Temperature Rating15 to 150 deg F
-
MaterialPVC
-
ColorRed
-
TypePneumatic Air Tool Hose
-
SeriesHS1174
-
Working Pressure300 psi
-
Inside Diameter1/2 in
-
Domestic/ImportImport
-
Outside Diameter0.750 in
-
Length50 ft
-
End StyleMale NPT
-
Package DescriptionEACH
-
Standards/ApprovalsPhthalate Free
-
Catalog
-
Specification Sheet
-
Owners/User Manual
-
Technical Bulletin
Recently Viewed
Kuri Tec® HS1174-08X50 HS1174 Hose, Male NPT End Style, 50 ft L, 300 psi Working, PVC, Import
Kuri Tec® HS1174-08X50 HS1174 Hose, Male NPT End Style, 50 ft L, 300 psi Working, PVC, Import
Coilhose® PFE61000T Flexeel® PFE6 Straight Air Hose, 3/8 in, 1000 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
MORSE® 95837 5980 Center Cutting Honed Edge Regular Length Single End Mill, 1/2 in Dia Cutter, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Aluminum Chromium Titanium Nitride
MORSE® 95837 5980 Center Cutting Honed Edge Regular Length Single End Mill, 1/2 in Dia Cutter, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Aluminum Chromium Titanium Nitride
Flexzilla® HFZ3850YW2 Air Hose With 1/4 in Fitting, MNPT End Style, 50 ft L, 300 psi Working, Hybrid Polymer
Flexzilla® is a revolutionary hose featuring a flexible hybrid polymer material that redefines flexibility. This engineered polymer blend material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla® hose characteristics offer zero memory allowing it to lay flat. It won't work against you during operation and coils easily after use. Flexzilla® offers extreme all weather flexibility, even in subzero conditions and is ideal in both hot and cold environments where tight radius bends are needed.
Coilhose® CH10 Ball Chuck and Clip, 1/4 in FPT Thread, Brass, Domestic
Coilhose® CH10 Ball Chuck and Clip, 1/4 in FPT Thread, Brass, Domestic
MORSE® 45314 4640C Center Cutting Regular Length Roughing End Mill, 5/8 in Dia Cutter, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, TiCN Coated
MORSE® 45314 4640C Center Cutting Regular Length Roughing End Mill, 5/8 in Dia Cutter, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, TiCN Coated
