Reelcraft 1/2" W/O HOSE OIL HOSE REELS REC 7800-OMP
Series 7000 is very robust and ideal for the most demanding applications. The reel's base and guide arm are formed from high grade steel engineered with structural forms and gussets to yield the greatest amount of strength. The standard low pressure hose is for air or water service only. The basic reel without hose can be used for air, water or oil. Guide arm adjusts to three positions.
-
BrandReelcraft®
-
UPC699567001331
-
Manufacturer Part Number7800 OMP
-
CountryUSA
-
FinishPowder Coated
-
MaterialReinforced Steel
-
Pressure Rating3250 psi
-
ColorRed
-
TypeFull Flow Swivel Heavy Duty
-
Series7000
-
Hose Capacity1/2 in ID x 0.82 in OD x 50 ft L
-
Dimensions19 in L x 7 in W x 20-1/4 in H
-
Domestic/ImportDomestic
-
Drive TypeSpring
- Reinforced steel - the steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight
- Full flow stress free swivel design - the full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life
- The hose is plumbed into the base to eliminate the risk of undue stress on the swivel
- Long life drive spring - declutching arbor virtually eliminates possibility of spring damage due to reverse winding
- Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life
- Quality finish and corrosion-resistant - individually powder coated components offer the maximum protection from premature corrosion
- 1/2 in female NPTF inlet
- 210 deg F maximum temperature rating
- Without hose
-
UNSPSC40142022
-
Package Description1/PK
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Recently Viewed
Series 7000 is very robust and ideal for the most demanding applications. The reel's base and guide arm are formed from high grade steel engineered with structural forms and gussets to yield the greatest amount of strength. The standard low pressure hose is for air or water service only. The basic reel without hose can be used for air, water or oil. Guide arm adjusts to three positions.
HCI Preferred Supplier 28134 Close Pipe Nipple, 1/2 in Nominal, 1.12 in L, Brass, NPTF End Style
HCI Preferred Supplier 28134 Close Pipe Nipple, 1/2 in Nominal, 1.12 in L, Brass, NPTF End Style
Dodge® Tigear-2® 26S25R Size 26 Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 2.26 hp, 25:1 Gear, 70 rpm Maximum Output, 1677 in-lb Torque Rating
The Tigear-2® is a right angle, single stage worm gear reducer with a rugged cast iron housing and power dense gearing design to ensure maximum reliability. Stainless Steel and the exclusive E-Z-Kleen® finish are available for tough washdown applications.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
9-OZ. 5-MINUTE EPOXY. DRIES CLEAR. BONDS IN 4-7 MINUTES-JWH328073 >
SATCO® S4717 Dimmable Specialty Incandescent Lamp, 6 W, E12 Incandescent Lamp, S6 Shape, 30 Lumens Initial
Incandescent lamps represent the original lighting technology, remaining virtually unchanged since their invention in the mid-19th century, and the lighting technology Satco was founded upon. This is the technology most everyone has become familiar with and the baseline comparison for all other lighting technologies. As the incandescent bulb becomes more and more regulated, Satco remains on the cutting edge of new lighting technologies. Still, we remain well-stocked with incandescent lamps in a multitude of wattages, base sizes, and shapes for every application.
