Reelcraft 3/8" X 35' PRE-WASH HOSE REELS REC 5635-OLP-SW-5
Reelcraft® 5635 OLPSW5 5000 Pre-Rinse Crafted Hose Reel, 3/8 in ID x 0.64 in OD x 35 ft L Hose, 250 psi Pressure, Domestic
-
BrandReelcraft®
-
UPC699567002697
-
Manufacturer Part Number5635 OLPSW5
-
CountryUSA
-
FinishPowder Coated
-
MaterialReinforced Steel
-
Pressure Rating250 psi
-
ColorRed
-
TypePre-Rinse Crafted
-
Series5000
-
Hose Capacity3/8 in ID x 0.64 in OD x 35 ft L
-
Dimensions13-3/4 in L x 6 in W x 14-1/2 in H
-
Domestic/ImportDomestic
-
Drive TypeSpring
- Optional 360 deg rotating hose end swivel (PN: 600248) offers 20 degrees of angular motion
- Superior latch spring design - the torsions style latch spring life far exceeds that of conventional coil springs
- Full flow stress free swivel design - the full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life
- The swivel rides on a through shaft offering unparalled support and strength
- Long life drive spring - declutching arbor eliminates reverse spring winding and torsions latch spring is virtually unbreakable
- High quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life
- 3/8 in hose inside diameter
- 3/8 in female NPTF inlet
- Nozzle outlet
- 210 deg F maximum temperature rating
-
UNSPSC40142022
-
Package Description1/PK
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Recently Viewed
Reelcraft® 5635 OLPSW5 5000 Pre-Rinse Crafted Hose Reel, 3/8 in ID x 0.64 in OD x 35 ft L Hose, 250 psi Pressure, Domestic
20-MALE JICXO-RING FLANGE STRAIGHT-DAY3602024 >
Series 7000 is very robust and ideal for the most demanding applications. The reel's base and guide arm are formed from high grade steel engineered with structural forms and gussets to yield the greatest amount of strength. The standard low pressure hose is for air or water service only. The basic reel without hose can be used for air, water or oil. Guide arm adjusts to three positions.
HCI Preferred Supplier 28134 Close Pipe Nipple, 1/2 in Nominal, 1.12 in L, Brass, NPTF End Style
HCI Preferred Supplier 28134 Close Pipe Nipple, 1/2 in Nominal, 1.12 in L, Brass, NPTF End Style
Dodge® Tigear-2® 26S25R Size 26 Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 2.26 hp, 25:1 Gear, 70 rpm Maximum Output, 1677 in-lb Torque Rating
The Tigear-2® is a right angle, single stage worm gear reducer with a rugged cast iron housing and power dense gearing design to ensure maximum reliability. Stainless Steel and the exclusive E-Z-Kleen® finish are available for tough washdown applications.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
