Air Hose
FLEXCOIL POLYURETHANE AIR HOSE ASSEMBLIES
I.D. X O.D.--.160" X 1/4"
LENGTH--10'
MPT FITTING--1/4" 2-SWIVEL
COLOR--DARK BLUE
FLEXCOIL POLYURETHANE AIR HOSE ASSEMBLIES
I.D. X O.D. X .160" X 1/4"
MPT FITTING--1/4" 2-SWIVEL
LENGTH--15'
COLOR--YELLOW
FLEXCOIL POLYURETHANE AIR HOSE ASSEMBLIES
I.D. X O.D.--1/4" X 3/8"
LENGTH--10'
MPT FITTING--1/4" 2-SWIVEL
COLOR--TRANSPARENT BLUE
1/4" X 25' POLY COIL AIR HOSES
1" 250-PSI AIR, WATER, OIL, GAS HOSE (FT)-GATPREMOFLEX1 >
Hose Inside Diameter (ID): 1/4" Hose Length: 5 'Fittings Included: 1/4" Male NPT (MPT) with one rigid end and one swivel end Fitting Material: Reusable brass strain-relief fittings Material Composition: 95A durometer polyurethane resin (offers excellent recoil memory and less retraction pulling force than nylon)Color: Dark Blue Durability: Resistant to abrasion, heavy kinking, most oils, and common fuels Pigtail Tails: Built-in straight whip-ends (16" at the tool end, 8" at the supply end) to maximize usability without needing a separate whip hose.
3/8" X 50' COIL AIR HOSES
I.D.--3/8"
LENGTH--50'
FITTING--3/8" 2-RIGID
WALL THICKNESS--.062+/-.004
WORKING PRESSURE AT 70-DEGREES-F--230-PSI
COLOR--BLUE
HEAVY WALLS PROVIDE ADDITIONAL PROTECTION AGAINST OIL, GREASE,
GASOLINE AND ABRASION AS WELL AS INCREASED WORKING PRESSURE.
Recently Viewed
5 PINT TUB WITHOUT HANDLE-LEA5PT >
FYH® UCFB207 20 UCFB Cylindrical Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 1-13/16 in L Bolt Center-to-Center, 3/8 in Dia Bolt Circle, 3-Bolt Flange Mount, 3-17/32 in OAL/Dia
FYH® UCFB207 20 UCFB Cylindrical Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 1-13/16 in L Bolt Center-to-Center, 3/8 in Dia Bolt Circle, 3-Bolt Flange Mount, 3-17/32 in OAL/Dia
MORSE® 43502 1897 Non-Center Cutting Regular Length Single End End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-3/8 in OAL, Bright
2-1/2" STEEL LOCKING SNAP HOOKS-FRE135>
MORSE® 44428 4586 Center Cutting Regular Length Single End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, Bright
Gates® Power Transmission PowerGrip® 480H150 Heavy Timing Belt, 1-1/2 in W, 48 in OAL, 1/2 in Pitch, 96 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.