Crosby® 1031617 HG-226 Turnbuckle, Eye/Eye, 1 in Thread, 10000 lb Working, 24 in Take Up, 40.6 in L Close, Steel
Crosby® 1031617 HG-226 Turnbuckle, Eye/Eye, 1 in Thread, 10000 lb Working, 24 in Take Up, 40.6 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1031617
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter1 in
-
MaterialSteel
-
Closed Length40.6 in
-
SeriesHG-226
-
Working Load10000 lb
-
End/EndEye/Eye
-
Take Up24 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b/Type 1/Form 1/Class 4|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1031617 HG-226 Turnbuckle, Eye/Eye, 1 in Thread, 10000 lb Working, 24 in Take Up, 40.6 in L Close, Steel
Crosby® 1031617 HG-226 Turnbuckle, Eye/Eye, 1 in Thread, 10000 lb Working, 24 in Take Up, 40.6 in L Close, Steel
Jacobs® 9679 JKP 80-J2S High Precision Keyless Drill Chuck, 0.012 to 0.315 in Capacity, #2 JS Mounting, Ball Bearing
Jacobs® 9679 JKP 80-J2S High Precision Keyless Drill Chuck, 0.012 to 0.315 in Capacity, #2 JS Mounting, Ball Bearing
1/4" X 1-1/2" USS Carriage Bolts
Dodge® 023017 215 Type E-Xtra Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 9.31 to 9.69 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 12 in OAL 6-1/4 in OAH
Dodge® 023017 215 Type E-Xtra Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 9.31 to 9.69 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 12 in OAL x 6-1/4 in OAH
Hillman™ 230003 Lag Screw, 1/4 in, 1 in OAL, Grade 2 Steel, Zinc Plated, Hex Drive
BBI 847412 Partially Threaded Cap Screw, 9/16-18, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847412 Partially Threaded Cap Screw, 9/16-18, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3

