Crosby® 1031939 HG-227-1/2X6 Turnbuckle, Jaw/Eye, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.48 in L Close, Steel
Crosby® 1031939 HG-227 Turnbuckle, Jaw/Eye, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.48 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1031939
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter1/2 in
-
MaterialSteel
-
Closed Length14.48 in
-
SeriesHG-227
-
Working Load2200 lb
-
End/EndJaw/Eye
-
Take Up6 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- For turnbuckles size 1/4 in through 2-1/2 in, a shackle one size smaller can be reeved through eye
- Forged jaw ends are fitted with bolts and nuts for 1/4 in through 5/8 in and pins and cotters on 3/4 in through 2-3/4 in sizes
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b Type 1/Form 1/Class 8|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1031939 HG-227-1/2X6 Turnbuckle, Jaw/Eye, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.48 in L Close, Steel
Crosby® 1031939 HG-227 Turnbuckle, Jaw/Eye, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.48 in L Close, Steel
MORSE® 59315 5961 Center Cutting Regular Length Single End End Mill, 3.5 mm Dia Cutter, 12 mm Length of Cut, 4 Flutes, 4 mm Dia Shank, 51 mm OAL, Bright
A superior, lead-free industrial coating formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag and gives twice the coverage of conventional aerosol enamels. A rust proof industrial primer formulated specifically for use with MRO® industrial protective coatings. This high solids paint gives twice the coverage of conventional aerosol primers. Heat resistant, VOC compliant and fast drying.
United Abrasives-SAIT 80000 Coated Shop Roll, 25 yd L x 1-1/2 in W, 120 Grit, Fine Grade, Aluminum Oxide Abrasive, Cloth Backing
Browning® 3749900 Taper Lock Bushing, 1-9/16 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
ASP-100-2-S Industry Standard Clamping Collar, 2-Piece Construction, 1 in ID x 1-3/4 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
