Air Hose
3/8" X 50' COIL AIR HOSES-COIS3850>
POLYURETHANE HOSE 1/4" X 10-COIPU1410R >
1/4" X 5'MPT RIGID SWIVEL BLUE HOSE-COIPU145AB >
1" 250-PSI AIR, WATER, OIL, GAS HOSE (FT)-GATPREMOFLEX1 >
1/4" X 25' POLY COIL AIR HOSES-COIPR1425Y>
1/4" X 10' POLY COIL AIR HOSE-COIPR1410BT>
5/32" X 15' POLY COIL AIR HOSES-COIPR53215BY>
5/32" X 10' POLY COIL AIR HOSE-COIPR53210BB >
5/16" X 15' POLY COIL AIR HOSES-COIPR51615BT>
5/16" X 15' COIL AIR HOSES-COIPR516154BY>
3/8" X 30' 2-SWIVEL COIL AIR HOSES-COIPR3830BB>
3/8" X 10' 2 SWIVEL COIL AIR HOSES-COIPR38104BB>
1/4" X 5' POLY COIL AIR HOSE-COIPR145BT >
1/4" X 15' POLY COIL AIR HOSE-COIPR1415BT >
12-MM-OD X 9-MM POLY TUBE-RL/100'-COIPE1215100K>
3/8"-OD NATURAL POLY TUBE--RL/100'-COIPE064100>
4-MM POLY TUBE-RL/1000'-COIPE04651000>
1/4"-OD YELLOW POLY TUBE-RL/500'COIPE0417500Y>
1/4" X .170" RED POLY TUBE--RL/500'-COIPE0417500R>
1/4" X .170" BLUE POLY TUBE--RL-500'-COIPE0417500B>
1/4" OD ORANGE POLY TUBING 100 FT.-COIPE0417100Q>
4-MM X 6-MM OD BLUE TUBE-RL/100-COIPE0610100B>
5/16" X 50' 2-SWIVEL COIL AIR HOSE-COIN516540B>
3/4" X 12' 2-SWIVEL COIL AIR HOSE-COIN3412B>
Recently Viewed
Milwaukee® 48-22-2322 9-in-1 General Purpose Ratcheting Multi-Bit Screwdriver, 9 Pieces, Phillips®/Slotted/Square Point, Ergonomic Grip Handle, Steel
Milwaukee 9IN1 ratcheting multi-bit drivers feature 3-1/2 in. power groove bits for power tool compatibility and maximum jobsite versatility. The chrome plated bits provide marine-grade rust protection and reduce wear from the elements on the job. The all metal high torque ratchet allows for 2X faster driving without sacrificing control. Milwaukee 9IN1 multi-bit drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee® 48-20-5155 Heavy Duty Thick Wall Core Bit, 4 in Drill - Fraction, 4 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
