N316-12-B COILHOSE PNEUMATICA PRODUCTS
3/16" X 12' 2-SWIVEL COIL AIR HOSE-COIN31612B>
Recently Viewed
3/16" X 12' 2-SWIVEL COIL AIR HOSE-COIN31612B>
Dremel® 194 Tube Brush, Flat End, Cylindrical Head, 1/8 in Dia Head, 1-1/2 in OAL, Standard Tooth
Dremel® 194 Tube Brush, Flat End, Cylindrical Head, 1/8 in Dia Head, 1-1/2 in OAL, Standard Tooth
Gates® Power Transmission MegaCrimp™ 8G-15FDLORX G25 Straight Hydraulic Coupling, 12.7 mm x M22x1.5 Nominal, Hose x DIN 24 deg Female Cone Swivel End Style, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
1/4" OD ORANGE POLY TUBING 100 FT.-COIPE0417100Q>
MasterDrive R2-60MM R2 Series Double Split Tapered Bushing, 60 mm Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
MasterDrive R2-2.7/8 R2 Series Double Split Tapered Bushing, 2.87 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
