Tube & Hose Ferrules
HCI Preferred Supplier 32588 Smooth Hose Ferrule, 1.175 in Nominal, 7/8 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32588 Smooth Hose Ferrule, 1.175 in Nominal, 7/8 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32584 Smooth Hose Ferrule, 1.1 in Nominal, 0.843 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32584 Smooth Hose Ferrule, 1.1 in Nominal, 0.843 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32579 Smooth Hose Ferrule, 7/8 in Nominal, 0.843 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32579 Smooth Hose Ferrule, 7/8 in Nominal, 0.843 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32577 Smooth Hose Ferrule, 0.812 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32577 Smooth Hose Ferrule, 0.812 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32575 Smooth Hose Ferrule, 0.781 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32575 Smooth Hose Ferrule, 0.781 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32573 Smooth Hose Ferrule, 3/4 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32573 Smooth Hose Ferrule, 3/4 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32570 Smooth Hose Ferrule, 0.718 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32570 Smooth Hose Ferrule, 0.718 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32568 Smooth Hose Ferrule, 0.69 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32568 Smooth Hose Ferrule, 0.69 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32559 Smooth Hose Ferrule, 0.56 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32559 Smooth Hose Ferrule, 0.56 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32554 Smooth Hose Ferrule, 1/2 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32554 Smooth Hose Ferrule, 1/2 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32552 Smooth Hose Ferrule, 0.478 in Nominal, 0.687 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32552 Smooth Hose Ferrule, 0.478 in Nominal, 0.687 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32521 Smooth Hose Ferrule, 0.525 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32521 Smooth Hose Ferrule, 0.525 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
Dixon® BFM687 Ferrule, 0.687 in Nominal, 1 in L, Brass, Domestic
Recently Viewed
18/2" CLEAR LAMP CORD--250' ROLL-JWH548995 >
NACHI 7212B Angular Contact Ball Bearing, 60 mm Dia Bore, 110 mm OD, 1 Row, 22 mm W, 40 deg, 58000 N Dynamic/46000 N Static Load
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. A matching high shoulder is often on the opposite side of the inner ring as well. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. This ball bearing has a 40 deg contact angle. This bearing has a stamped steel cage and is not available with seals or shields. These bearings are non-separable. These bearings have normal tolerances and are not suitable for mounting adjacent to each other to achieve a preload.
Drillco 76A128C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
POSTS/PANELS-HLW50941807TAN>
Browning® 1296375 Automatic Torque Limiter, 3/4 in Straight Bore, 3-1/2 in OD, 1800 in-lb (1 Spring)/3000 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
BBI 221238 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 3-1/2 in L Shoulder, 3/4-5/8-11
BBI 221238 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 3-1/2 in L Shoulder, 3/4-5/8-11
