John Guest® PSEI012826 Male Connector, Adapter, 3/4 in Nominal, CTS x MNPT End Style, Polysulfone, Domestic
The Speedfit secure range of fittings ensures a secure connection when adapting Speedfit Pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread (refer to tape manufacturers recommendations), working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component. Do not over-tighten the fitting. To lock pipe in place, push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.
-
BrandJohn Guest®
-
UPC665628036345
-
Manufacturer Part NumberPSEI012826
-
CountryUSA
-
Temperature Rating200 deg F
-
MaterialPolysulfone
-
Fitting/Connector TypeAdapter
-
Pressure Rating160 psi
-
ColorWhite
-
Nominal Size3/4 in
-
Domestic/ImportDomestic
-
End StyleCTS x MNPT
- Speedfit fittings can be used with: PEX, Copper and CPVC Pipes conforming to ASTM Standards
- Speedfit fittings cannot be used on stainless steel pipe
- Fittings are manufactured from high quality engineered plastic with EPDM O-Rings
- Speedfit push-in system is suitable for hot and cold water plumbing applications
- Working pressures and temperatures: 160 psi at 73 deg F, 100 psi at 180 deg F, 80 psi at 200 deg F
- Lead free
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | JPSEI012826 |
-
UNSPSC40183110
-
Package Description50/BX
-
Standards/ApprovalscUPC Listed|ESR No 1931|NSF 61
-
Catalog
Recently Viewed
John Guest® PSEI012826 Male Connector, Adapter, 3/4 in Nominal, CTS x MNPT End Style, Polysulfone, Domestic
The Speedfit secure range of fittings ensures a secure connection when adapting Speedfit Pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread (refer to tape manufacturers recommendations), working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component. Do not over-tighten the fitting. To lock pipe in place, push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.
30-MM X 2 METRIC DIN FITTING-DAY30DIN12BW>
Dixon® 14WLMP-G200 Light Duty Clamp Ferrule, 2 in Nominal, Clamp x Weld End Style, 304 Stainless Steel, Domestic
Dixon® 14WLMP-G200 Light Duty Clamp Ferrule, 2 in Nominal, Clamp x Weld End Style, 304 Stainless Steel, Domestic
2-GPM 1600-PSI 115-VOLT HOT WATER PRESSURE WASHER - ALK216AX4>
HCI Preferred Supplier 32559 Smooth Hose Ferrule, 0.56 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
HCI Preferred Supplier 32559 Smooth Hose Ferrule, 0.56 in Nominal, 1 in L, 0.025 mm THK, ASTMB36 Alloy 268 Brass
12" X 10' SHELF AND DRAWER WHITE LINER-JWH602639 >
