HCI Preferred Supplier 18195L Light Pattern Tube-to-Pipe Adapter, 1/2 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18195L Light Pattern Tube-to-Pipe Adapter, 1/2 in, Compression x MNPTF, Brass
-
BrandGeneric
-
Manufacturer Part Number18195L
-
CountryUSA
-
Temperature Rating-65 to 250 deg F
-
MaterialBrass
-
Fitting/Connector TypeAdapter
-
Pressure Rating200 psi
-
TypeLight Pattern
-
Nominal Size1/2 in
-
Hex Size0.81 in
-
End StyleCompression x MNPTF
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved
- Fair resistance use long nut when greater vibration resistance is needed
- /-0.02 tolerance on all dimensions
- Not recommended for steel tubing
- These fittings are completely interchangeable with full pattern fittings, but have been modified in some way
- This modification is usually in the length of the pipe threads
-
UNSPSC40183109
-
Package Description1/PK
-
Standards/ApprovalsASA|ASME and SAE 060102
-
Catalog
Recently Viewed
HCI Preferred Supplier 18195L Light Pattern Tube-to-Pipe Adapter, 1/2 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18195L Light Pattern Tube-to-Pipe Adapter, 1/2 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18189L Light Pattern Tube-to-Pipe Adapter, 3/8 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18189L Light Pattern Tube-to-Pipe Adapter, 3/8 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18142 Tube-to-Pipe Adapter, 1/8 in, Compression x FNPTF, Brass
HCI Preferred Supplier 18142 Tube-to-Pipe Adapter, 1/8 in, Compression x FNPTF, Brass
HCI Preferred Supplier 20063N Tube-to-Pipe Adapter, 1/2 in Nominal, Push-In x Male Global Thread End Style, Brass
HCI Preferred Supplier 20063N Tube-to-Pipe Adapter, 1/2 in Nominal, Push-In x Male Global Thread End Style, Brass
The Zamac Nailin® is a nail drive anchor which has a body formed from zamac alloy. Drive nails are available in carbon or stainless steel. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant zamac alloy is used to form the anchor body with either a mushroom or flathead. The anchor can be used for light duty, tamperproof applications. The anchor is not recommend for overhead, life safety or sustained tensile loading applications (see performance data section).
HCI Preferred Supplier 18178 Tube-to-Pipe Adapter, 3/16 x 1/4 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18178 Tube-to-Pipe Adapter, 3/16 x 1/4 in, Compression x MNPTF, Brass
